Infineon RF-switch, 10 Ben TSLP-10
- RS-artikelnummer:
- 249-8619
- Tillv. art.nr:
- BGSA144ML10E6327XTSA1
- Tillverkare / varumärke:
- Infineon
För närvarande inte tillgänglig
Vi vet inte om den här artikeln kommer tillbaka i lager, RS har för avsikt att ta bort den från vårt utbud snart.
- RS-artikelnummer:
- 249-8619
- Tillv. art.nr:
- BGSA144ML10E6327XTSA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Varumärke | Infineon | |
| Produkttyp | RF-switch | |
| Teknologi | RF-switch | |
| Kapseltyp | TSLP-10 | |
| Antal ben | 10 | |
| Typ av fäste | Yta | |
| Gränssnittstyp | RF, MIPI | |
| Serie | BGSA144ML10 | |
| Standarder/godkännanden | RoHS/WEEE | |
| Fordonsstandard | Nej | |
| Välj alla | ||
|---|---|---|
Varumärke Infineon | ||
Produkttyp RF-switch | ||
Teknologi RF-switch | ||
Kapseltyp TSLP-10 | ||
Antal ben 10 | ||
Typ av fäste Yta | ||
Gränssnittstyp RF, MIPI | ||
Serie BGSA144ML10 | ||
Standarder/godkännanden RoHS/WEEE | ||
Fordonsstandard Nej | ||
The Infineon Ultra high RF voltage antenna is a single-pole four-throws (SP4T) Antenna Tuning switch optimized for RF applications up to 7.125GHz and made of 4 low ON resistance / low OFF capacitance series switches and 4 shunt to ground switches enabling on-demand open-reflective or short-reflective OFF ports behaviour, this last feature is of great value to reduce antenna engineer development time in case of unwanted antenna resonance or to improve antenna efficiency with less component tuning effort.
Low Ron resistance of 1.74 ohm at each RF port in ON state
Ultra low Coff capacitance of 89 fF in OFF state
Individually controlled reflective open or short to ground OFF ports to eliminate unwanted antenna resonances
High RF operating peak voltage handling of 80 V in OFF state
MIPI RFFE 2.1 compliant control interface
External USID_SEL pin enabling 4 default USID addresses
Small form factor 1.1 mm x 1.5 mm
