Elesa DD52R Räknare, 5 siffra Räknare

Se alla Räknarkretsar

Antal (1 enhet)*

739,39 kr

(exkl. moms)

924,24 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 12 enhet(er) från den 20 april 2026
  • Dessutom levereras 8 enhet(er) från den 20 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +739,39 kr

*vägledande pris

RS-artikelnummer:
382-6530
Tillv. art.nr:
CE.82183-rb
Tillverkare / varumärke:
Elesa
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Elesa

Produkttyp

Räknare

Funktion

Räknare

Antal siffror

5

Rotationsriktning

Medurs

Räkneriktning

Topp utgående

Sifferhöjd

85mm

Vikt

97g

Standarder/godkännanden

No

Mätartyp

Räknare

Serie

DD52R

Uppfyller ej RoHS

COO (ursprungsland):
IT

Elesa Digital Mechanical Position Indicator


The Elesa DD52 series mechanical resolution counter is a 5-digit direct drive, digital position indicator. It has clockwise shaft rotation with a maximum shaft speed of 1250rpm. It is the black case, high-resistance, polyamide based (PA) technopolymer. It can be used for reading settings and outputs on machinery, as well as equipment requiring adjustment with the help of rotating shafts or lead screws.

Operating use:

To give an exact reading of distance moved by relating the reading of the indicator to the thread pitch of the shaft or lead screw (type dependant on the pitch -see table)

To count the number of turns of a shaft (types 001.00 or 0001.0) for an operator to set a specific setting to perform a given function

Fitting Instructions:

Drill 6mm by 10mm deep hole 22mm from the centre of the shaft to accept rear locating pin

Zero set shaft and indicator reading

Locate on the shaft and tighten the grub screw

Features and Benefits


Pitch is 2.0

Display after 1 rev is 0002.0

Impact resistant thermoplastic case

Ultrasonically welded to prevent tampering and dirt ingression

Rear brass bushing with double sealing

Drive shaft diameter is 14mm

Applications


Material handling equipment

Rapid transit vehicles

Street sweepers

Farm machinery

Carts for recreational use

Certifications


IP67 rated

Relaterade länkar