KNITTER-SWITCH Push Button Bezel for Use with MPA Push Button Switches, MPE Push Button Switches, 51631
- RS-artikelnummer:
- 134-2462
- Tillv. art.nr:
- CO 106
- Tillverkare / varumärke:
- KNITTER-SWITCH
Mängdrabatt möjlig
Antal (1 enhet)*
59,18 kr
(exkl. moms)
73,98 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 13 enhet(er) är redo att levereras
- Plus 19 enhet(er) är redo att levereras från en annan plats
- Dessutom levereras 49 enhet(er) från den 22 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 59,18 kr |
| 5 - 9 | 54,54 kr |
| 10 - 24 | 53,42 kr |
| 25 - 49 | 48,72 kr |
| 50 + | 44,58 kr |
*vägledande pris
- RS-artikelnummer:
- 134-2462
- Tillv. art.nr:
- CO 106
- Tillverkare / varumärke:
- KNITTER-SWITCH
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | KNITTER-SWITCH | |
| Accessory Type | Brass Chromium-plated Bezel | |
| For Use With | MPA Push Button Switches, MPE Push Button Switches, 51631 | |
| Välj alla | ||
|---|---|---|
Brand KNITTER-SWITCH | ||
Accessory Type Brass Chromium-plated Bezel | ||
For Use With MPA Push Button Switches, MPE Push Button Switches, 51631 | ||
- COO (Country of Origin):
- CN
Knitter-Switch Miniature Push Button Switches - MPA & MPE Series
Knitter-Switch MPA and waterproof MPE series of miniature Push Button switches are available in a choice of SPDT or DPDT contact configurations with momentary or alternate switching functions and solder terminals.
Both the MPA and the IP67 waterproof MPE switches are designed to be panel mounted. They have a contact resistance less than 10mΩ and an insulation resistance greater than 1000MΩ. They are epoxy sealed with a flux proof construction.
Accessories for the MPA and the waterproof MPE miniature Push Button switches include a brass chromium-plated bezel and a 15mm diameter black actuator button, see stock number 134-2462.
Both the MPA and the IP67 waterproof MPE switches are designed to be panel mounted. They have a contact resistance less than 10mΩ and an insulation resistance greater than 1000MΩ. They are epoxy sealed with a flux proof construction.
Accessories for the MPA and the waterproof MPE miniature Push Button switches include a brass chromium-plated bezel and a 15mm diameter black actuator button, see stock number 134-2462.
Momentary or alternate switching
Waterproof IP67 rated - MPE series only
Maximum switch rating of 6A at 125Vac, 3A at 250Vac
Silver plated contacts
M6 bush
Solder terminals
Contact resistance <10mΩ maximum
Dielectric strength 1500Vac for 1 minute
Insulation resistance 1000MΩ minimum
Mechanical life >30,000 operations
Operating temperature range -45 to +140°C
Waterproof IP67 rated - MPE series only
Maximum switch rating of 6A at 125Vac, 3A at 250Vac
Silver plated contacts
M6 bush
Solder terminals
Contact resistance <10mΩ maximum
Dielectric strength 1500Vac for 1 minute
Insulation resistance 1000MΩ minimum
Mechanical life >30,000 operations
Operating temperature range -45 to +140°C
Note
Actuator button is not supplied with the switch and must be ordered separately. For a suitable 15mm black button see stock number 7830053
Momentary switches have the momentary state displayed in brackets, e.g. on - (on).
Momentary switches have the momentary state displayed in brackets, e.g. on - (on).
Supplied with
Mounting hardware.

relaterade länkar
- KNITTER-SWITCH Green Push Button Cap for Use with MP5 Series Push Button Switch 15
- KNITTER-SWITCH Orange Push Button Cap for Use with MP5 Series Push Button Switch 10
- KNITTER-SWITCH Orange Push Button Cap for Use with MP5 Series Push Button Switch 15
- KNITTER-SWITCH Grey Push Button Cap for Use with MP5 Series Push Button Switch 15
- KNITTER-SWITCH Blue Push Button Cap for Use with MP5 Series Push Button Switch 15
- KNITTER-SWITCH Yellow Push Button Cap for Use with MP5 Series Push Button Switch 15
- KNITTER-SWITCH White Push Button Cap for Use with MP5 Series Push Button Switch 15
- KNITTER-SWITCH Red Push Button Cap for Use with MP5 Series Push Button Switch 15 (Dia.)
