Telemecanique Sensors Inductive Block Proximity Sensor, 4 mm Detection, 2-Wire NO, 24 → 240 V ac/dc

Se alla Proximity Sensors
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
RS-artikelnummer:
221-1730
Tillv. art.nr:
XS8G12MA230
Tillverkare / varumärke:
Telemecanique Sensors
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Telemecanique Sensors

Sensor Technology

Inductive

Body Style

Block

Detection Range

4 mm

Digital Switching Output Type

2-Wire

Output Function

NO

Cable Length

2m

Connection Type

Pre-Cabled

Supply Voltage

24 → 240 V ac/dc

Length

26mm

IP Rating

IP67

Mounting Type

Non-Flush

Maximum DC Voltage

210V

Minimum Operating Temperature

-25°C

Depth

26mm

Shielding

Unshielded

Maximum Switching Frequency

250 Hz, 25Hz

Switching Current

200 mA

Series

XS

Switching Frequency

250 Hz, 25 Hz

Maximum Operating Temperature

+70°C

COO (ursprungsland):
ID
The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced.

Body type Fixed
Enclosure material Plastic
Type of output signal Discrete
Wiring technique 2-wire
[Sn] nominal sensing
distance
4 mm
Discrete output function 1 NO
Electrical connection Cable
Cable length 2 m
Wire insulation material PVC
[Us] rated supply
voltage
24...210 V DC
24...240 V AC 50/60 Hz
Switching capacity in
mA
5...200 mA

relaterade länkar