Telemecanique Sensors Inductive Threaded Barrel Proximity Sensor, M18, 5 mm Detection, 2-Wire NO, 24 → 240 V

Se alla Proximity Sensors
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
RS-artikelnummer:
221-1672
Tillv. art.nr:
XS518B1MAL5
Tillverkare / varumärke:
Telemecanique Sensors
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Telemecanique Sensors

Thread Size

M18

Sensor Technology

Inductive

Body Style

Threaded Barrel

Detection Range

5 mm

Digital Switching Output Type

2-Wire

Output Function

NO

Connection Type

Pre-Cabled

Cable Length

5m

Supply Voltage

24 → 240 V ac/dc

Length

62mm

IP Rating

IP68, IP69K

Mounting Type

Flush

Maximum DC Voltage

240V

Minimum Operating Temperature

-25°C

Shielding

Shielded

Depth

24mm

Switching Current

300 mA, 200 mA

Maximum Switching Frequency

1 kHz, 25Hz

Series

XS

Maximum Operating Temperature

+70°C

Switching Frequency

1 kHz, 25 Hz

COO (Country of Origin):
FR
The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced.

Body type Fixed
Detector flush mounting
acceptance
Flush mountable
Material Metal
Type of output signal Discrete
Wiring technique 2-wire
[Sn] nominal sensing
distance
5 mm
Discrete output function 1 NO
Output circuit type AC/DC
Electrical connection cable
Cable length 5 m
[Us] rated supply
voltage
24...240 V AC/DC with reverse polarity protection
Switching capacity in
mA
5...200 mA DC
5...300 mA AC

relaterade länkar