CY8CMBR3108-LQXI Cypress Semiconductor, 300mm 1.71 V to 5.5 V 16-Pin QFN

Se alla Proximity Sensor ICs

Antal (1 fack med 490 enheter)*

8 004,15 kr

(exkl. moms)

10 005,31 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • Leverans från den 27 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per Bricka*
490 +16,335 kr8 004,15 kr

*vägledande pris

RS-artikelnummer:
188-5386
Tillv. art.nr:
CY8CMBR3108-LQXI
Tillverkare / varumärke:
Cypress Semiconductor
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Cypress Semiconductor

Sensor Type

Proximity Sensor

Maximum Switching Frequency

400 (Clock) MHz

Maximum Output Current

-1 (High Level) mA, 10 (Low Level) mA

Maximum Output Voltage

0.6 (Low Level) V

Sensing Distance

300mm

Switching Mode

Analogue

Output Type

PWM

Mounting Type

Surface Mount

Package Type

QFN

Pin Count

16

Maximum Supply Current

140 mA

Dimensions

3 x 3 x 0.55mm

Height

0.55mm

Length

3mm

Width

3mm

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Minimum Operating Supply Voltage

1.71 V

Maximum Operating Supply Voltage

5.5 V

COO (Country of Origin):
US

CapSense® Touch Controllers, Cypress Semiconductor


A range of Programmable System-on-chip (PSoC®) products from Cypress Semiconductor incorporating analogue sub-systems with capacitive sensing hardware. These configurable devices include an on-board MCU and are aimed primarily at capacitive touch screen applications.

Register-configurable CapSense Express controller
No firmware development required
Patented CSD sensing algorithm
High sensitivity (0.1 pF)
Overlay thickness of up to 15 mm for glass and 5 mm for plastic
Proximity solutions
Sensitivity up to 2 fF per count
Best-in-class >100:1 SNR performance
Superior noise-immunity performance against conducted and radiated noise
Ultra-low radiated emissions
SmartSense Auto-tuning
Sets and maintains optimal sensor performance during run time
Eliminates manual tuning during development and production
Low-power CapSense
Average current consumption of 22 μA per sensor at 120-ms refresh interval
Wide parasitic capacitance (CP) range: 5–45 pF
Advanced user interface features
Liquid tolerance
User-configurable LED brightness for visual touch feedback
Up to eight high-sink current GPOs to drive LEDs
Buzzer signal output for audible touch feedback
Flanking Sensor Suppression (FSS) to eliminate false touches in closely spaced buttons
Analog voltage output
Attention line interrupt to the host to indicate any change in sensor status


Touch Screen Controllers

relaterade länkar