RawlPlug Steel Masonry Anchor M12 x 145 mm 20 mm

Se alla Masonry Bolts & Anchors

Antal (1 förpackning med 5 enheter)*

611,41 kr

(exkl. moms)

764,26 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 25 enhet(er) från den 26 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per förpackning*
5 +122,282 kr611,41 kr

*vägledande pris

RS-artikelnummer:
681-6744
Tillv. art.nr:
R-RBL-12HW
Tillverkare / varumärke:
RawlPlug
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

RawlPlug

Product Type

Masonry Anchor

Thread Size

M12

Sub Type

Shield Anchor Hook Bolt

Drill Diameter

20 mm

Length

145mm

Material

Steel

Standards/Approvals

ISO 7380, DIN 7985T, ISO 7379, DIN 85, DIN 933, DIN 963, DIN 965, DIN 916, DIN 84, DIN 7985, DIN 965T, DIN 964, DIN 912, DIN 931

RoHS-status: Inte relevant

COO (Country of Origin):
PL

RawlPlug R-RBL-H Rawlbolt™ All Purpose Shield Anchor Plug Hook Bolt.


From RawlPlug this is the R-RBL-H Rawlbolt shield anchor Hook bolt plug, one of RawlPlug’s most sought after all purpose expanding shield anchors. The R-RBL-H Rawlbolt is the Hook bolt version, designed to provide you with maximum performance. The expanding sleeve is made up of 3-pieces providing excellent expansion and optimum load safety for any material.

Features and Benefits.


  • R-RBL-H Rawlbolt Expanding Hook Bolt Plug.

  • Shield anchor.

  • Expanding.

  • Excellent durability.

  • 3-Piece expanding sleeve.

  • Optimal load and safety capacity.

  • Used in any material.

  • Suitable for permanent and temporary anchoring.
    • ;
  • Safety Note: Hook Rawlbolts and not suitable for all Arrest Systems or shock loading.

    • Typical Shield Anchor Hook Bolt Fixings Applications.


  • Supporting ladder restraints.

  • Supporting Guy ropes, stays and cables

    • Material the R-RBL-H Rawlbolt Hook Bolts are Compatible with?


    Approved for use in:;
  • Cracked concrete C20/25-C50/60.

  • Non-Cracked concrete C20/25-C50/60.

  • Unreinforced concrete.

  • Reinforced concrete.

  • Solid clay brick ≥ 20MPa.

  • Hollow lightweight concrete block LAC 5 ≥ 5MPa.

  • Hollow sand lime brick ≥ 15MPa.

  • Concrete hollow floor block (Teriva).

  • Hollow core slab C20/25.

  • Hollow core slab C30/37-C50/60.

    • R-RBL-H Rawlbolt Expansion Hook and Eye Bolts Fixings Available?


  • Stock number 528227, M6, Shield anchor Eye Bolt, 12 mm x 83 mm.

  • Stock number 528205, M6, Shield anchor Hook Bolt, 12 mm x 83 mm.

  • Stock number 528233, M8, Shield anchor Eye Bolt, 14 mm x 98 mm.

  • Stock number 528211, M8, Shield anchor Hook Bolt, 14 mm x 98 mm.

  • Stock number 6816738, M10, Shield anchor Eye Bolt, 16 mm x 120 mm.

  • Stock number 6816735, M10, Shield anchor Hook Bolt, 16 mm x 120 mm.

  • Stock number 6816731, M12, Shield anchor Eye Bolt, 20 mm x 145 mm.

  • Stock number 6816744, M12, Shield anchor Hook Bolt, 20 mm x 145 mm.

    • How to use the R-RBL-H Rawlbolt Expansion Hook / Eye Bolts?


  • Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.

  • Special note: If fixing into brickwork avoid all mortar joint areas.

  • Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blowpump).

  • Insert the anchor into the pre-drilled hole till it is flush with the surface then position the Hook as required.

  • Tighten the fixing carefully, only to the recommended torque using the Hex but and not the Hook.

    • relaterade länkar