RawlPlug Stainless Steel Masonry Anchor M12 x 145 mm 12 mm

Se alla Masonry Bolts & Anchors

Antal (1 förpackning med 5 enheter)*

650,98 kr

(exkl. moms)

813,725 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 25 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per förpackning*
5 +130,196 kr650,98 kr

*vägledande pris

RS-artikelnummer:
681-6731
Tillv. art.nr:
R-RBL-12EW
Tillverkare / varumärke:
RawlPlug
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

RawlPlug

Product Type

Masonry Anchor

Thread Size

M12

Sub Type

Anchor Bolt

Length

145mm

Drill Diameter

12 mm

Material

Stainless Steel

Standards/Approvals

DIN 916, DIN 912, DIN 965T, ISO 7380, DIN 933, ISO 7379, DIN 7985, DIN 84, DIN 931, DIN 965, DIN 85, DIN 963, DIN 7985T, DIN 964

RoHS-status: Inte relevant

COO (Country of Origin):
PL

RawlPlug R-RBL-E Rawlbolt™ All Purpose Shield Anchor Plug Eye Bolt.


From RawlPlug this is the R-RBL-E Rawlbolt shield anchor eye bolt plug, one of RawlPlug’s most sought after all purpose expanding shield anchors. The R-RBL-E Rawlbolt is the eye bolt version, the original single piece cold formed eye bolt closed forged hook with excellent durability and safety. The expanding sleeve is made up of 3-pieces providing excellent expansion and optimum load safety for any material.

Features and Benefits.


  • R-RBL-E Rawlbolt Expanding Eye Bolt Plug.

  • Shield anchor.

  • Expanding.

  • Single piece cold formed.

  • Excellent durability.

  • 3-Piece expanding sleeve.

  • Optimal load and safety capacity.

  • Used in any material.

  • Closed forged hook (maximum safety).

  • Suitable for permanent and temporary anchoring.
    • ;
  • Safety Note: Eye Rawlbolts and not suitable for all Arrest Systems or shock loading.

    • Typical Shield Anchor Eye Bolt Fixings Applications.


  • Supporting ladder restraints.

  • Supporting Guy ropes, stays and cables.

    • Material the R-RBL-E Rawlbolt Eye Bolts are Compatible with?


    Approved for use in:;
  • Cracked concrete C20/25-C50/60.

  • Non-Cracked concrete C20/25-C50/60.

  • Unreinforced concrete.

  • Reinforced concrete.

  • Solid clay brick ≥ 20MPa.

  • Hollow lightweight concrete block LAC 5 ≥ 5MPa.

  • Hollow sand lime brick ≥ 15MPa.

  • Hollow core slab C20/25.

  • Hollow core slab C30/37-C50/60.

    • R-RBL-E Rawlbolt Expansion Eye and Hook Bolts Fixings Available?


  • Stock number 528227, M6, Shield anchor Eye Bolt, 12 mm x 83 mm.

  • Stock number 528205, M6, Shield anchor Hook Bolt, 12 mm x 83 mm.

  • Stock number 528233, M8, Shield anchor Eye Bolt, 14 mm x 98 mm.

  • Stock number 528211, M8, Shield anchor Hook Bolt, 14 mm x 98 mm.

  • Stock number 6816738, M10, Shield anchor Eye Bolt, 16 mm x 120 mm.

  • Stock number 6816735, M10, Shield anchor Hook Bolt, 16 mm x 120 mm.

  • Stock number 6816731, M12, Shield anchor Eye Bolt, 20 mm x 145 mm.

  • Stock number 6816744, M12, Shield anchor Hook Bolt, 20 mm x 145 mm.

    • How to use the R-RBL-E Rawlbolt Expansion Eye Bolts?


  • Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.

  • Special note: If fixing into brickwork avoid all mortar joint areas.

  • Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything, use a blowpump).

  • Insert the anchor into the pre-drilled hole till it is flush with the surface then position the eye as required.

  • Tighten the fixing carefully, only to the recommended torque using the Hex but and not the eye.

    • Relaterade länkar