Fluke calibration 9100S/RS-A-256 Temperature Calibrator

A drywell heat source offering a combination of extreme portability and good performance to meet the requirements associated with high speed, high volume industrial calibrations in a shop floor environment. Use the instruments independently or together to make fast zero and span calibrations of temperature sensors.

Drywell for checking RTDs, thermocouples, and small bimetal thermometers in the field
Fast and easy calibrations of temperature sensors
Temperature range 35°C to 375°C, expandable to –10 °C to 375 °C when used with a 9102S drywell (see stock no 537-048)
Direct interface to the Fluke 744 Documenting Process Calibrator
Multiple sized sensor holes to accept a wide range of temperature sensor diameters

For 9100S carry case see stock no. 537-044

Power Cord, User's Guide with Report of Calibration, RS-232 Cable, 9930 Interface-it Software and User's Guide

Take charge of setting up your instrumentation devices with this temperature calibrator from FLUKE. You can use it to test and adjust the measurement range of your RTDs, thermocouples and bimetal thermometers. Simply plug it in, set the temperature range with its panel buttons and insert the probe of your device into its built-in pocket. This pocket comes with a heat source to warm the probe up, letting you clearly see if it's getting its thermal readings right.

• Integrated display screen for convenience
• Light weight of 1kg for easy portability
• Quick heating time to +375°C of 9.5 minutes and cooling time of 14 minutes for speedy operation

• Food and beverage production
• Laboratories
• Storage facilities
• Gas plants

Thanks to a wide temperature setting range between -35°C and +375°C, you can use the unit to test equipment used in extreme industrial applications.

This product has an accuracy rating of +0.25°C so you can reliably use it to reset your device with a minimal risk of errors.

’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa

Fluke 9100 Series Drywell Heat Sources