RS PRO RS PRO serien Silver Oisolerad Hane Flatstiftskontakt, 6.35 x 0.8 mm Flatkontakt 16 AWG 14 AWG
- RS-artikelnummer:
- 488-1279
- Tillverkare / varumärke:
- RS PRO
Mängdrabatt möjlig
Antal (1 förpackning med 100 enheter)*
121,50 kr
(exkl. moms)
151,90 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 43 200 enhet(er) från den 23 mars 2026
- Dessutom levereras 6 600 enhet(er) från den 23 mars 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 100 - 400 | 1,215 kr | 121,50 kr |
| 500 - 2400 | 1,033 kr | 103,30 kr |
| 2500 + | 0,909 kr | 90,90 kr |
*vägledande pris
- RS-artikelnummer:
- 488-1279
- Tillverkare / varumärke:
- RS PRO
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Varumärke | RS PRO | |
| Termineringstyp | Crimp | |
| Produkttyp | Flatstiftskontakt | |
| hane/hona | Hane | |
| Fliktjocklek | 0.8mm | |
| Flikstorlek | 6.35 x 0.8 mm | |
| Flikbredd | 6.35mm | |
| Isolation | Oisolerad | |
| Maximal ledarstorlek AWG | 14 AWG | |
| Minsta ledarstorlek AWG | 16 AWG | |
| Färg | Silver | |
| Kontaktmaterial | Mässing | |
| Kontaktplätering | Burk | |
| Orientering | Rak | |
| Standarder/godkännanden | No | |
| Total längd | 20mm | |
| Serie | RS PRO | |
| Välj alla | ||
|---|---|---|
Varumärke RS PRO | ||
Termineringstyp Crimp | ||
Produkttyp Flatstiftskontakt | ||
hane/hona Hane | ||
Fliktjocklek 0.8mm | ||
Flikstorlek 6.35 x 0.8 mm | ||
Flikbredd 6.35mm | ||
Isolation Oisolerad | ||
Maximal ledarstorlek AWG 14 AWG | ||
Minsta ledarstorlek AWG 16 AWG | ||
Färg Silver | ||
Kontaktmaterial Mässing | ||
Kontaktplätering Burk | ||
Orientering Rak | ||
Standarder/godkännanden No | ||
Total längd 20mm | ||
Serie RS PRO | ||
- COO (ursprungsland):
- TW
RS PRO Uninsulated Spade Connector, 6.35 mm x 0.8 mm Tab Size, 1.5 mm² to 2.5 mm²
Use this spade connector to link up single wires to relays or components, or in any situation where you need to make fast, reliable connections. This spade connector is made to fit 6.3 mm receptacles and its design allows terminals to be connected and disconnected while the bolt is still partially screwed in.
Tin-plated brass contacts provide extra strength and conductivity and are resistant to corrosion, oxidation and degradation. The connector is designed for crimp termination, which lets you create mechanically strong solder-free joints using just a pair of pliers. It's a method that's suited for large and small cross-section wires, which can be easily slotted into the component once the other wire has been crimped on the opposite end.
This spade connector is most commonly found in automotive electronics applications and domestic appliances such as dishwashers.
Features and Benefits
• Uninsulated spade connector
• Wire size range of 1.5 mm² to 2.5 mm², 16 AWG to 14 AWG
• Length of 20 mm
• Tab width of 6.35 mm
• Tab thickness of 0.8 mm
• Male connector
• Unshrouded
• Crimp termination method
• Brass contacts, tin-plated
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Small Pack Size
Per Unit, RS stock no: 488-1279
Large Pack Size
RS stock no: 270-7471