Sök efter MPN

OEP Surface Pulse Transformer 1:1 Turns Ratio, 3.6 h Prim. Inductance, 111Ω Prim. Resistance

RS-artikelnummer:: 210-6273
Tillv. art.nr:: OEP8000
Tillverkare / varumärke:: OEP

OEP Surface Pulse Transformer 1:1 Turns Ratio, 3.6 h Prim. Inductance, 111Ω Prim. Resistance

Mängdrabatt möjlig

Antal (1 enhet)*

64,40 kr

(exkl. moms)

80,50 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

Tillfälligt slut

175 enhet(er) levereras från den 26 mars 2026

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet
1 - 49	64,40 kr
50 +	59,02 kr

*vägledande pris

RS-artikelnummer:: 210-6273
Tillv. art.nr:: OEP8000
Tillverkare / varumärke:: OEP

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	OEP
	Product Type	Pulse Transformer
	Primary Inductance	3.6h
	Primary DC Resistance	111Ω
	Secondary DC Resistance	111Ω
	Insertion Loss	4dB
	Turns Ratio	1:1
	Mount Type	Surface
	Leakage Inductance	4100μH
	Minimum Operating Temperature	-10°C
	Number of Pins	6
	Maximum Operating Temperature	85°C
	Length	9mm
	Width	7.3 mm
	Depth	14.2mm
	Maximum Operating Frequency	4kHz
	Standards/Approvals	No
	Minimum Operating Frequency	200Hz
	Isolation Voltage	3.3kV
	Termination Type	Solder

	Välj alla
	Brand OEP
	Product Type Pulse Transformer
	Primary Inductance 3.6h
	Primary DC Resistance 111Ω
	Secondary DC Resistance 111Ω
	Insertion Loss 4dB
	Turns Ratio 1:1
	Mount Type Surface
	Leakage Inductance 4100μH
	Minimum Operating Temperature -10°C
	Number of Pins 6
	Maximum Operating Temperature 85°C
	Length 9mm
	Width 7.3 mm
	Depth 14.2mm
	Maximum Operating Frequency 4kHz
	Standards/Approvals No
	Minimum Operating Frequency 200Hz
	Isolation Voltage 3.3kV
	Termination Type Solder

COO (Country of Origin):: CN

OEP, Line Isolating Transformers

From OEP, this selection of compact encapsulated PCB and surface mount line isolating transformers are for use in data transmission applications. They are approved and certified for use in telecommunications circuits required to meet BS6305 (Speech and Non-Speech Class A) providing the line hold current is diverted from the windings by a choke or other electronic means. Constructed from resin encapsulated in a glass filled nylon box, these line isolating transformers are flame retardant to UL94-V0 requirements.

Note

Stock no. 210-6273 is a surface mount device.

Approvals

BABT

Standards

BS415; EN60950; EN41003