STMicroelectronics Demonstration Board Power Management for STBB1-APUR for MOSFET Switch
- RS-artikelnummer:
- 196-1834
- Tillv. art.nr:
- STEVAL-ISA063V2
- Tillverkare / varumärke:
- STMicroelectronics
Antal (1 enhet)*
402,12 kr
(exkl. moms)
502,65 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Försörjningsbrist
- Dessutom levereras 2 enhet(er) från den 24 december 2025
Vårt nuvarande lager är begränsat och våra leverantörer förväntar sig brist.
Enheter | Per enhet |
|---|---|
| 1 + | 402,12 kr |
*vägledande pris
- RS-artikelnummer:
- 196-1834
- Tillv. art.nr:
- STEVAL-ISA063V2
- Tillverkare / varumärke:
- STMicroelectronics
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | STMicroelectronics | |
| Product Type | Power Management Development Kit | |
| Power Management Function | Power Management | |
| For Use With | MOSFET Switch | |
| Kit Classification | Evaluation Board | |
| Featured Device | STBB1-APUR | |
| Kit Name | Demonstration Board | |
| Standards/Approvals | RoHS | |
| Välj alla | ||
|---|---|---|
Brand STMicroelectronics | ||
Product Type Power Management Development Kit | ||
Power Management Function Power Management | ||
For Use With MOSFET Switch | ||
Kit Classification Evaluation Board | ||
Featured Device STBB1-APUR | ||
Kit Name Demonstration Board | ||
Standards/Approvals RoHS | ||
- COO (Country of Origin):
- IT
The STEVAL-ISA063V2 demonstration board implements a typical buck-boost DC-DC converter based on STMicroelectronics STBB1-APUR high efficiency single inductor dual mode buck-boost DC-DC converter. The device is fixed frequency and capable of providing output voltages ranging from 1.2 V to 5.5 V and input voltages from 2.0 V to 5.5 V.
The STBB1-APUR can operate with input voltages higher than, equal to, or lower than the output voltage, rendering the product suitable for single lithium-ion (Li-Ion), multicell alkaline or NiMH applications where the output voltage is within the battery voltage range.
The integrated low-RDSonN-channel and P-channel MOSFET switches contribute to its high efficiency.
Buck-boost DC-DC converter
Operating input voltage range: 2.0 V to 5.5 V
2% DC feedback voltage tolerance
Synchronous rectification
Shutdown function
1.5 MHz switching frequency
Power save mode at light load
Typical efficiency: > 94%
1 A output current capability
Shutdown current: < 1 μA
relaterade länkar
- STMicroelectronics Demonstration Board Power Management for VIPer06XN for Power Supply
- STMicroelectronics Demonstration Board Power Management for ST7580 for Power Line Applications
- STMicroelectronics Demonstration Board Power Management for VNI8200XP for High Side Driver
- STMicroelectronics Demonstration Board Power Management for VIPER16LD for Non-Isolated SMPS
- STMicroelectronics Demonstration Board Power Management for L7980 for Step-Down Switching Regulator
- STMicroelectronics Demonstration Board Power Management for L5973D for Step-Down Switching Regulator
- STMicroelectronics Demonstration Board Power Management for VIPER16 for Non-Isolated Auxiliary Power Supply
- STMicroelectronics Demonstration Board Power Management for STPM10 for Single-Phase Microprocessor-Based Meter
