ROHM BD7693FJ-E2, PFC Controller, 50 kHz, 38 V 8-Pin, SOP
- RS-artikelnummer:
- 235-2584
- Tillv. art.nr:
- BD7693FJ-E2
- Tillverkare / varumärke:
- ROHM
Antal (1 rulle med 2500 enheter)*
8 655,00 kr
(exkl. moms)
10 820,00 kr
(inkl. moms)
Lagerinformation är för närvarande otillgänglig
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 2500 + | 3,462 kr | 8 655,00 kr |
*vägledande pris
- RS-artikelnummer:
- 235-2584
- Tillv. art.nr:
- BD7693FJ-E2
- Tillverkare / varumärke:
- ROHM
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | ROHM | |
| Maximum Switching Frequency | 50 kHz | |
| Start-up Supply Current | 100µA | |
| Maximum Source Current | -0.5A | |
| IC Type | Power Factor Controller IC | |
| Maximum Sink Current | 1A | |
| Maximum Supply Current | 2 mA | |
| Package Type | SOP | |
| Pin Count | 8 | |
| Maximum Operating Supply Voltage | 38 V | |
| Välj alla | ||
|---|---|---|
Brand ROHM | ||
Maximum Switching Frequency 50 kHz | ||
Start-up Supply Current 100µA | ||
Maximum Source Current -0.5A | ||
IC Type Power Factor Controller IC | ||
Maximum Sink Current 1A | ||
Maximum Supply Current 2 mA | ||
Package Type SOP | ||
Pin Count 8 | ||
Maximum Operating Supply Voltage 38 V | ||
The ROHM power factor correction IC for AC/DC supplies the system which is suitable for all the products needing power factor improvement. The PFC adopts boundary conduction mode, and switching loss reduction and noise reduction are possible by zero current detection. This IC incorporates a circuit lowering total harmonics distortion and can support IEC61000-3-2 Class-C.
Low THD circuit incorporation
Low power consumption
ZCD by auxiliary winding
Error amplifier input short protection
Stable MOSFET gate drive
Soft start
Low power consumption
ZCD by auxiliary winding
Error amplifier input short protection
Stable MOSFET gate drive
Soft start