STMicroelectronics L6562ADTR, Power Factor Controller, 22.5 V 8-Pin, SOIC

Lagstiftning och ursprungsland

PWM Controllers, STMicroelectronics

Pulse-width modulator (PWM) controllers can support isolated and non-isolated AC-DC and DC-DC switch mode power supplies. They are based on the most popular topologies in both single-ended, such as fly-back, forward or quasi-resonant controllers, and double-ended configurations, such as asymmetrical half-bridge, for Switch Mode Power Supplies (SMPS).
The PMW controllers also integrate a comprehensive set of protections for enhanced robustness and reliability.

PWM (Pulse Width Modulation) Controllers, STMicroelectronics

Attribute Value
Start-up Supply Current 0.03mA
Maximum Source Current -5mA
Maximum Sink Current 4500µA
Maximum Supply Current 0.06 mA
Zero Power Detection Yes
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 5 x 4 x 1.25mm
Height 1.25mm
Length 5mm
Maximum Operating Supply Voltage 22.5 V
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -40 °C
Width 4mm
Minimum Operating Supply Voltage 10.5 V
2500 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (On a Reel of 2500)
3,086 kr
(exkl. moms)
3,858 kr
(inkl. moms)
Per unit
Per Reel*
2500 +
3,086 kr
7 715,00 kr
Related Products
Texas Instruments integrated controllers for Power Factor Correction ...
Texas Instruments integrated controllers for Power Factor Correction (PFC) in pre-regulators and PFC converters can achieve near unity power factor and give stable, low distortion sinusoidal line currents. They utilise advanced features and innovative processes such as quantized voltage feed-forward, ...
Intelligent controlMenu driven handling (plain language; ... control ...
Intelligent controlMenu driven handling (plain language; ... control capabilityAutomatic initialisationTest-run possibleLarge voltage measuring rangeRecall function of recorded valuesFour-quadrant operation (e.g. stand by generator)Control series editorDetailed expert modesAlarm output6 Relay outputsVoltage: 230Vac.
The NCP1631 is a controller for use in 2-phase interleaved power factor correction pre-converters. Interleaving consists of paralleling two small stages in lieu of a single big stage. This approach has several merits like ease of implementation, ability to use ...
BD7690FJ is Power Factor Correction for AC/DC supplies ...
BD7690FJ is Power Factor Correction for AC/DC supplies the system which is suitable for all the products needing power factor improvement. The PFC adopts boundary conduction mode (BCM), and switching loss reduction and noise reduction are possible by Zero Current ...