Power Integrations PFS7635H, Power Factor Controller, 123 kHz, 15 V 16-Pin, eSIP-16D

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

The HiperPFS-4 devices incorporate a continuous conduction mode (CCM) boost PFC controller, gate driver and 600 V power MOSFET in a single, low-profile (GROUND pin connected) power package. HiperPFS-4 devices eliminate need for external current sense resistors and their associated power loss, and use an innovative control technique that adjusts the switching frequency over output load, input line voltage, and input line cycle.

Integrated 600 V MOSFET
EN61000-3-2 Class C and D compliant
Highly integrated for smallest boost PFC form factor
Packaging optimized for high volume production
Eliminates insulating pad/heat-spreader
Programmable Power Good (PG) signal

Specifikationer
Attribute Value
Maximum Switching Frequency 123 kHz
Maximum Supply Current 1.05 mA
Zero Power Detection Yes
Mounting Type Through Hole
Package Type ESIP-16D
Pin Count 16
Dimensions 16.59 x 2.06 x 8.25mm
Height 8.25mm
Length 16.59mm
Maximum Operating Supply Voltage 15 V
Maximum Operating Temperature +150 °C
Minimum Operating Supply Voltage 10.2 V
Width 2.06mm
Minimum Operating Temperature -40 °C
180 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Tube of 30)
14,786 kr
(exkl. moms)
18,482 kr
(inkl. moms)
Enheter
Per unit
Per Tube*
30 +
14,786 kr
443,58 kr
Related Products
Power factor controllers with variable CRM, CCM, and ...
Description:
Power factor controllers with variable CRM, CCM, and DCM that enable power factor correction.
The NCP1632 integrated a dual MOSFET driver for ...
Description:
The NCP1632 integrated a dual MOSFET driver for interleaved PFC applications. Interleaving consists of paralleling two small stages in lieu of a bigger one, more difficult to design. This approach has several merits like the ease of implementation, the use ...
On-board 700 V start-up sourceTracking boost functionFast “bidirectional” ...
Description:
On-board 700 V start-up sourceTracking boost functionFast “bidirectional” input voltage feedforward (1/V2 correction)Interface for cascaded converter's PWM controllerRemote ON/OFF controlAccurate adjustable output overvoltage protectionProtection against feedback loop disconnection (latched ...
DIP-8/SO-8 packages-600/+800 mA totem pole gate driver with ...
Description:
DIP-8/SO-8 packages-600/+800 mA totem pole gate driver with active pull-down during UVLO and voltage clampDisable function on E/A inputDigital leading-edge blanking on current senseGuaranteed for extreme temperature range (outdoor)Very accurate adjustable output overvoltage protectionProprietary multiplier design ...