BASEC White 2C 1.5mm Enhanced Fire Cable
- RS-artikelnummer:
- 841-2448
- Tillverkare / varumärke:
- RS PRO
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
Alternativ
Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.
1 rulle med 100 meter
2 703,69 kr
(exkl. moms)
3 379,61 kr
(inkl. moms)
- RS-artikelnummer:
- 841-2448
- Tillverkare / varumärke:
- RS PRO
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | RS PRO | |
| Cross Sectional Area | 1.5 mm² | |
| Number of Cores | 2 | |
| Sheath Colour | White | |
| Length | 100m | |
| Cable Type | Fire Performance | |
| Current Rating | 19.5 A | |
| Outer Diameter | 9.3mm | |
| Voltage Rating | 500 V | |
| Conductor Strand Type | Solid | |
| Insulation Material | Silicone | |
| Maximum Operating Temperature | +90°C | |
| Conductor Material | Annealed Copper | |
| Standards Met | BASEC | |
| American Wire Gauge | 15 AWG | |
| Conductor Resistance | 12.1 Ω/km | |
| Minimum Operating Temperature | -40°C | |
| Fire Behaviour | Low Smoke Zero Halogen (LSZH) | |
| Series | Enhanced | |
| Välj alla | ||
|---|---|---|
Brand RS PRO | ||
Cross Sectional Area 1.5 mm² | ||
Number of Cores 2 | ||
Sheath Colour White | ||
Length 100m | ||
Cable Type Fire Performance | ||
Current Rating 19.5 A | ||
Outer Diameter 9.3mm | ||
Voltage Rating 500 V | ||
Conductor Strand Type Solid | ||
Insulation Material Silicone | ||
Maximum Operating Temperature +90°C | ||
Conductor Material Annealed Copper | ||
Standards Met BASEC | ||
American Wire Gauge 15 AWG | ||
Conductor Resistance 12.1 Ω/km | ||
Minimum Operating Temperature -40°C | ||
Fire Behaviour Low Smoke Zero Halogen (LSZH) | ||
Series Enhanced | ||
- COO (Country of Origin):
- GB
BASEC Enhanced Fire Cable
In buildings where you require the very best fire protection such as schools, colleges, public buildings the 2 hour duration provided by an 'Enhanced' Fire Cable is now under demand. This range of cables provide just that as they have been independently tested and approved by BASEC to meet the 'Enhanced' standard of BS 5839-1 2002+A2:2008 Clause 26.2e, BS 8434 - 2:2003 120 minutes and BS EN 50200 Class PH30, PH60 & PH120.
The design adds simple but effective strength and makes preparation for, and actual installation, quick and easy compared to other fire enhanced cables. The outer sheath and foil are adhered so together are removed at the same time, no time consuming multiple sheaths, foils, wraps or mica tapes to remove and flexibility is good.
The NoBurn Plus soft skin fire cable provides a cost effective quick to install alternative to MICC cables.
The design adds simple but effective strength and makes preparation for, and actual installation, quick and easy compared to other fire enhanced cables. The outer sheath and foil are adhered so together are removed at the same time, no time consuming multiple sheaths, foils, wraps or mica tapes to remove and flexibility is good.
The NoBurn Plus soft skin fire cable provides a cost effective quick to install alternative to MICC cables.
Features and Benefits
• Suitable for air conditioning, computer control & lift doors where Low Smoke & Zero Halogen is required
• Suitable for Zone 1 and Zone 2 hazardous area use
• Excellent working flexibility
• Fast preparation for termination
• Up to 12 twists per metre for Data Protection
• Easy installation
• Low smoke and zero halogen
• BASEC
Product Application Information
Suitable for automatic lift doors, air conditioning and computer control where low smoke, fume and zero halogen cable is required, these cables are manufactured with multiple twists to provide the highest level of data protection, ideal for long cable runs and analogue addressable fire systems.