Lapp NYY-J 10 mm² 3 Core Power Cable, Black PVC, 50m
- RS-artikelnummer:
- 721-0699
- Tillv. art.nr:
- 15500603
- Tillverkare / varumärke:
- Lapp
Antal (1 rulle med 50 meter)*
8 764,01 kr
(exkl. moms)
10 955,01 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 2 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Rulle(ar) | Per rulle | Per meter* |
|---|---|---|
| 1 + | 8 764,01 kr | 175,28 kr |
*vägledande pris
- RS-artikelnummer:
- 721-0699
- Tillv. art.nr:
- 15500603
- Tillverkare / varumärke:
- Lapp
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Lapp | |
| Cross Sectional Area | 10 mm² | |
| Number of Cores | 3 | |
| Sheath Colour | Black | |
| Length | 50m | |
| Current Rating | 59 A | |
| Outer Diameter | 18mm | |
| Sheath Material | PVC | |
| CPR Certification | Eca | |
| Voltage Rating | 1 kV, 600 V | |
| Conductor Strand Type | Solid | |
| Maximum Operating Temperature | +50°C | |
| Insulation Material | PVC | |
| Series | NYY-J | |
| Fire Behaviour | Flame Retardant | |
| Size of Strands | 3.56 mm | |
| Conductor Material | Bare Copper | |
| Core Strands | 3.56 mm | |
| American Wire Gauge | 7 AWG | |
| Conductor Resistance | 1.83 Ω/km | |
| Standards Met | Euroclass Eca | |
| Minimum Operating Temperature | +5°C | |
| Välj alla | ||
|---|---|---|
Brand Lapp | ||
Cross Sectional Area 10 mm² | ||
Number of Cores 3 | ||
Sheath Colour Black | ||
Length 50m | ||
Current Rating 59 A | ||
Outer Diameter 18mm | ||
Sheath Material PVC | ||
CPR Certification Eca | ||
Voltage Rating 1 kV, 600 V | ||
Conductor Strand Type Solid | ||
Maximum Operating Temperature +50°C | ||
Insulation Material PVC | ||
Series NYY-J | ||
Fire Behaviour Flame Retardant | ||
Size of Strands 3.56 mm | ||
Conductor Material Bare Copper | ||
Core Strands 3.56 mm | ||
American Wire Gauge 7 AWG | ||
Conductor Resistance 1.83 Ω/km | ||
Standards Met Euroclass Eca | ||
Minimum Operating Temperature +5°C | ||
Lapp Fixed Installation Power Cable - NYY-J
From Lapp, this NYY-J cable is a widely-used power and control cable that is often found in domestic and commercial electrical wiring. As well as being used in fixed installations, the cable is designed to be used for direct burial, and burial in concrete, providing the operating temperature is adhered to.
The cable is bare copper single core with PVC with a filling compounds over the core assembly. The PVC sheath is flame retardant and robust, allowing the cable to be used in dry, damp and wet interiors. NYY-J cable is also able very resistant to UV, and so is able to be used outdoors.
Features and Benefits
Bare copper conductors
PVC-based outer sheath
Suitable for outdoor use
Flame-retardant according IEC 60332-1-2
Above, below, flush and recess routing
Operating temperature during installation: -5°C to +50°C
Operating temperature in a fixed installation: -40°C to +70°C
Applications
Able to be installed in open air and underground, NYY-J cable presents a versatile power cable that should be used in where the risk of mechanical damage is unlikely. As such it can be used in brickwork and concrete, proving the concrete is not shaken, vibrated or compressed. Lapp NYY-J able is often used in;
Power stations
Distributor boards
Subscriber networks
The cable is bare copper single core with PVC with a filling compounds over the core assembly. The PVC sheath is flame retardant and robust, allowing the cable to be used in dry, damp and wet interiors. NYY-J cable is also able very resistant to UV, and so is able to be used outdoors.
Features and Benefits
Bare copper conductors
PVC-based outer sheath
Suitable for outdoor use
Flame-retardant according IEC 60332-1-2
Above, below, flush and recess routing
Operating temperature during installation: -5°C to +50°C
Operating temperature in a fixed installation: -40°C to +70°C
Applications
Able to be installed in open air and underground, NYY-J cable presents a versatile power cable that should be used in where the risk of mechanical damage is unlikely. As such it can be used in brickwork and concrete, proving the concrete is not shaken, vibrated or compressed. Lapp NYY-J able is often used in;
Power stations
Distributor boards
Subscriber networks
Power Cable
relaterade länkar
- Lapp NYY-J NYY-J 4 mm² 4 Core Power Cable 50m
- Lapp NYY-J Power 10 mm² 4 Core Power Cable 50m
- Lapp NYY-J 6 mm² 3 Core Power Cable 50m
- Lapp NYY-J 16 mm² 3 Core Power Cable 50m
- Lapp NYY-J 1.5 mm² 3 Core Power Cable 50m
- Lapp NYY-J 10 mm² 5 Core Power Cable 50m
- Lapp NYY-J 2.5 mm² 4 Core Power Cable 50m
- Lapp NYY-J 1.5 mm² 4 Core Power Cable 50m
