Lapp NYY-J 16 mm² 3 Core Power Cable, Black PVC, 50m
- RS-artikelnummer:
- 721-0709
- Tillv. art.nr:
- 15500613
- Tillverkare / varumärke:
- Lapp
Antal (1 rulle med 50 meter)*
13 644,67 kr
(exkl. moms)
17 055,84 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 12 mars 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Rulle(ar) | Per rulle | Per meter* |
|---|---|---|
| 1 + | 13 644,67 kr | 272,893 kr |
*vägledande pris
- RS-artikelnummer:
- 721-0709
- Tillv. art.nr:
- 15500613
- Tillverkare / varumärke:
- Lapp
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Lapp | |
| Cross Sectional Area | 16 mm² | |
| Number of Cores | 3 | |
| Sheath Colour | Black | |
| Length | 50m | |
| Current Rating | 79 A | |
| CPR Certification | Eca | |
| Sheath Material | PVC | |
| Outer Diameter | 20mm | |
| Voltage Rating | 1 kV, 600 V | |
| Conductor Strand Type | Solid | |
| Series | NYY-J | |
| Core Strands | 4.51 mm | |
| Insulation Material | PVC | |
| Conductor Resistance | 1.15 Ω/km | |
| Standards Met | Euroclass Eca | |
| Minimum Operating Temperature | +5°C | |
| Size of Strands | 4.51 mm | |
| American Wire Gauge | 5 AWG | |
| Fire Behaviour | Flame Retardant | |
| Maximum Operating Temperature | +50°C | |
| Conductor Material | Bare Copper | |
| Välj alla | ||
|---|---|---|
Brand Lapp | ||
Cross Sectional Area 16 mm² | ||
Number of Cores 3 | ||
Sheath Colour Black | ||
Length 50m | ||
Current Rating 79 A | ||
CPR Certification Eca | ||
Sheath Material PVC | ||
Outer Diameter 20mm | ||
Voltage Rating 1 kV, 600 V | ||
Conductor Strand Type Solid | ||
Series NYY-J | ||
Core Strands 4.51 mm | ||
Insulation Material PVC | ||
Conductor Resistance 1.15 Ω/km | ||
Standards Met Euroclass Eca | ||
Minimum Operating Temperature +5°C | ||
Size of Strands 4.51 mm | ||
American Wire Gauge 5 AWG | ||
Fire Behaviour Flame Retardant | ||
Maximum Operating Temperature +50°C | ||
Conductor Material Bare Copper | ||
Lapp Fixed Installation Power Cable - NYY-J
From Lapp, this NYY-J cable is a widely-used power and control cable that is often found in domestic and commercial electrical wiring. As well as being used in fixed installations, the cable is designed to be used for direct burial, and burial in concrete, providing the operating temperature is adhered to.
The cable is bare copper single core with PVC with a filling compounds over the core assembly. The PVC sheath is flame retardant and robust, allowing the cable to be used in dry, damp and wet interiors. NYY-J cable is also able very resistant to UV, and so is able to be used outdoors.
Features and Benefits
Bare copper conductors
PVC-based outer sheath
Suitable for outdoor use
Flame-retardant according IEC 60332-1-2
Above, below, flush and recess routing
Operating temperature during installation: -5°C to +50°C
Operating temperature in a fixed installation: -40°C to +70°C
Applications
Able to be installed in open air and underground, NYY-J cable presents a versatile power cable that should be used in where the risk of mechanical damage is unlikely. As such it can be used in brickwork and concrete, proving the concrete is not shaken, vibrated or compressed. Lapp NYY-J able is often used in;
Power stations
Distributor boards
Subscriber networks
The cable is bare copper single core with PVC with a filling compounds over the core assembly. The PVC sheath is flame retardant and robust, allowing the cable to be used in dry, damp and wet interiors. NYY-J cable is also able very resistant to UV, and so is able to be used outdoors.
Features and Benefits
Bare copper conductors
PVC-based outer sheath
Suitable for outdoor use
Flame-retardant according IEC 60332-1-2
Above, below, flush and recess routing
Operating temperature during installation: -5°C to +50°C
Operating temperature in a fixed installation: -40°C to +70°C
Applications
Able to be installed in open air and underground, NYY-J cable presents a versatile power cable that should be used in where the risk of mechanical damage is unlikely. As such it can be used in brickwork and concrete, proving the concrete is not shaken, vibrated or compressed. Lapp NYY-J able is often used in;
Power stations
Distributor boards
Subscriber networks
Power Cable
relaterade länkar
- Lapp NYY-J NYY-J 4 mm² 4 Core Power Cable 50m
- Lapp NYY-J 16 mm² 5 Core Power Cable 50m
- Lapp NYY-J 6 mm² 3 Core Power Cable 50m
- Lapp NYY-J 1.5 mm² 3 Core Power Cable 50m
- Lapp NYY-J 10 mm² 5 Core Power Cable 50m
- Lapp NYY-J 10 mm² 3 Core Power Cable 50m
- Lapp NYY-J 2.5 mm² 4 Core Power Cable 50m
- Lapp NYY-J 1.5 mm² 4 Core Power Cable 50m
