SMC EX510 series Pneumatic Logic Controller
- RS-artikelnummer:
- 426-828
- Tillv. art.nr:
- EX510-DYP3
- Tillverkare / varumärke:
- SMC
Antal (1 enhet)*
2 039,74 kr
(exkl. moms)
2 549,68 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 04 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 2 039,74 kr |
*vägledande pris
- RS-artikelnummer:
- 426-828
- Tillv. art.nr:
- EX510-DYP3
- Tillverkare / varumärke:
- SMC
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | SMC | |
| Product Type | Pneumatic Logic Controller | |
| Number of Inputs | 3 | |
| Series | EX510 | |
| Voltage | 24 V | |
| Display Type | LED Indicator | |
| Hazardous Area Certification | No | |
| Number of Outputs | 4 | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | -10°C | |
| Height | 31mm | |
| Width | 70 mm | |
| Standards/Approvals | UL, CSA, CE/UKCA | |
| Depth | 19.6mm | |
| Output Type | PNP | |
| Suitable Medias | Air | |
| Connection Type | M12 | |
| Välj alla | ||
|---|---|---|
Brand SMC | ||
Product Type Pneumatic Logic Controller | ||
Number of Inputs 3 | ||
Series EX510 | ||
Voltage 24 V | ||
Display Type LED Indicator | ||
Hazardous Area Certification No | ||
Number of Outputs 4 | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature -10°C | ||
Height 31mm | ||
Width 70 mm | ||
Standards/Approvals UL, CSA, CE/UKCA | ||
Depth 19.6mm | ||
Output Type PNP | ||
Suitable Medias Air | ||
Connection Type M12 | ||
- COO (Country of Origin):
- JP
The SMC EX510 Output Unit series makes it possible to connect more valves and sensors than with conventional units. With the introduction of the EX510 series, only a power supply cable to the GW unit is required, resulting in wire-savings. Setting the address for the SI unit, output unit and input unit is no longer required, only the address for the GW unit needs to be set. The volume ratio of the EX510 SI unit is 60% more compact than the EX120.
Output units with a maximum of 16 output points
Cage clamp type terminal base which does not need to be screwed
Compliant to either NPN or PNP
relaterade länkar
- SMC EX510 series Serial Interface
- SMC EX9 series Pneumatic Logic Controller
- SMC EX260 series Pneumatic Logic Controller
- SMC EX250 series Pneumatic Logic Controller
- SMC EX600 series Pneumatic Logic Controller
- SMC EX245 series Pneumatic Logic Controller
- SMC EX300 series Pneumatic Logic Controller
- SMC EX500 series Pneumatic Logic Controller