RS PRO Opaque Fluoroplastics PTFE Rod, 300mm x 120mm Diameter

Se alla Plastic Rods
Mängdrabatt möjlig

Antal (1 parti med 1 enhet)*

5 351,44 kr

(exkl. moms)

6 689,30 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 3 enhet(er) är redo att levereras
  • Plus 3 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Parti(er)
Per Parti
1 - 25 351,44 kr
3 - 54 976,83 kr
6 - 114 709,15 kr
12 +4 281,09 kr

*vägledande pris

RS-artikelnummer:
197-0023
Tillverkare / varumärke:
RS PRO
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

RS PRO

Colour

Opaque

Length

300mm

Material

PTFE

Form

Rod

Rod Diameter

120mm

Density

2.18 → 2.21g/cm³

Tensile Strength

25 MPa

Flammability Rating

UL 94 V-0

Elongation

50%

Maximum Operating Temperature

+260°C

Hardness

30 Ball Indentation

Thermal Conductivity

0.25W/mK

Water Absorption

0.3%

Suitability

Etching Plates & High Frequency Insulation, Pipe Lining, Pump Housing, Roller Covering, Slide Bearing & Runners

Melting Point

+327°C

COO (Country of Origin):
IT

RS PRO Opaque Fluoroplastics PTFE Rod, 300 mm x 120 mm Diameter


Need an easy way to produce high-quality parts and components? Turn to this PTFE (polytetrafluorethylene) rod from RS PRO. The material is highly machinable, and its 300 mm length means you can create a broad range of shapes and sizes.

Thanks to its strong dielectric performance, PTFE is an excellent choice for applications that are susceptible to electromagnetic sensitivity. It also has a high level of chemical and radiation resistance. Its UL 94 V-0 fire safety certification from Underwriters' Laboratories means it will only burn for 30 seconds, so it's safe for use in demanding environments.

The rod offers low friction and adhesion to allow for smooth motion while reducing noise and heat. It's commonly used for bearings, gaskets and gears in food processing and industrial manufacturing applications.

Features and Benefits


  • Opaque colour

  • Density of 2.18 to 2.21 g/cm³

  • Elongation of 50%

  • UL 94 V-0 flammability rating

  • Rod form

  • Hardness of 30 ball indentation

  • Length of 300 mm

  • PTFE material

  • Maximum operating temperature of +260°C

  • Rod diameter of 120 mm

  • Tensile strength of 25 MPa (megapascals)

  • Water absorption of 0.3%

    • Relaterade länkar