Fluke calibration 8808A Bench Digital Multimeter True RMS, 10 A Max, 10 A Max, 750 V ac Max

RS-artikelnummer:: 415-493
Distrelec artikelnummer:: 304-46-585
Tillv. art.nr:: FLUKE 8808A/SU 240V
Tillverkare / varumärke:: Fluke

Fluke calibration 8808A Bench Digital Multimeter True RMS, 10 A Max, 10 A Max, 750 V ac Max

Antal (1 enhet)*

12 759,64 kr

(exkl. moms)

15 949,55 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

Begränsat lager

17 kvar, redo att levereras

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet
1 +	12 759,64 kr

*vägledande pris

RS-artikelnummer:: 415-493
Distrelec artikelnummer:: 304-46-585
Tillv. art.nr:: FLUKE 8808A/SU 240V
Tillverkare / varumärke:: Fluke

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Fluke
	Multimeter Type	Bench
	Product Type	Multimeter
	Model Number	8808A
	Display Type	Digital
	Resistance Resolution	1mΩ
	Functions Measured	Resistance, AC Current, Frequency, DC Voltage, Continuity, AC Voltage, DC Current, Diode
	Maximum DC Voltage Measurement	1000V
	Maximum DC Current Measurement	10A
	Maximum AC Current Measurement	10A
	Maximum Resistance Measurement	100mΩ
	Maximum AC Voltage Measurement	750V ac
	True RMS	Yes
	DC Voltage Accuracy	±0.015% rdg + 0.003
	AC Voltage Accuracy	±0.9 % rdg + 0.05 Digits
	DC Current Accuracy	±0.2% rdg + 0.01
	AC Current Accuracy	±0.5 % rdg + 0.12
	AC Voltage Resolution	1μV
	DC Voltage Resolution	1 μV
	AC Current Resolution	0.1μA ac
	DC Current Resolution	0.001μA dc
	Maximum Frequency	100kHz
	Power Source	Mains
	Minimum Operating Temperature	0°C
	Resistance Measurement Accuracy	±1.75 % rdg + 0.004
	Maximum Operating Temperature	50°C
	Width	217 mm
	Standards/Approvals	No
	Weight	2.1kg
	Height	88mm
	Length	297mm
	Safety Category Level	CAT I, CAT II
	Calibrated	RSCAL
	Safety Category Voltage	1000V

	Välj alla
	Brand Fluke
	Multimeter Type Bench
	Product Type Multimeter
	Model Number 8808A
	Display Type Digital
	Resistance Resolution 1mΩ
	Functions Measured Resistance, AC Current, Frequency, DC Voltage, Continuity, AC Voltage, DC Current, Diode
	Maximum DC Voltage Measurement 1000V
	Maximum DC Current Measurement 10A
	Maximum AC Current Measurement 10A
	Maximum Resistance Measurement 100mΩ
	Maximum AC Voltage Measurement 750V ac
	True RMS Yes
	DC Voltage Accuracy ±0.015% rdg + 0.003
	AC Voltage Accuracy ±0.9 % rdg + 0.05 Digits
	DC Current Accuracy ±0.2% rdg + 0.01
	AC Current Accuracy ±0.5 % rdg + 0.12
	AC Voltage Resolution 1μV
	DC Voltage Resolution 1 μV
	AC Current Resolution 0.1μA ac
	DC Current Resolution 0.001μA dc
	Maximum Frequency 100kHz
	Power Source Mains
	Minimum Operating Temperature 0°C
	Resistance Measurement Accuracy ±1.75 % rdg + 0.004
	Maximum Operating Temperature 50°C
	Width 217 mm
	Standards/Approvals No
	Weight 2.1kg
	Height 88mm
	Length 297mm
	Safety Category Level CAT I, CAT II
	Calibrated RSCAL
	Safety Category Voltage 1000V

RoHS-status: Undantagen

COO (Country of Origin):: CN

FLUKE Multimeter, 20Hz To 1MHz Frequency Measurement, 1,000V DC Maximum Input - 8808A 240V

Take the guess work out of your functional tests with this bench multimeter from FLUKE. Its digital readings are clearly displayed on an LCD, which lets you determine quickly if your results are a pass or fail. The unit does double duty, as its dual display means you can conveniently measure two different parameters of the same signal using just one test connection. A wide variety of measurement functions such as ohms, volts, amps and frequency make this bench testing device a must-have piece of equipment for electrical technicians.

Features & Benefits

• Split terminal jacks let you carry out 4-wire measurements using only 2 leads

• Front-panel setup key allows for quick single-key access to saved setups

• Compatible with commonly used power distribution standards, for versatility

• Low-impedance amplifier and current-to-voltage conversion technique, offering accurate low-current leakage detection

Applications

• Electronics manufacture

• Laboratory-based engineers

• Factories and workshops

Is this multimeter portable?

Yes, this multimeter comes with a handle. If you're looking for a smaller hand-held unit, explore FLUKE's range of rugged industrial field devices (such as 606-3041).

Fluke 8808A Multimeter , 5.5 digit

The Fluke 8808A delivers a wide variety of measurement functions, including volts, ohms, and amps, plus frequency - with a basic V dc accuracy of 0.015 %

Six dedicated instrument setup keys to instantly select saved test configurations. Ideal for making routine measurements.

Large and clear Pass and Fail indication based on user defined limits

Extreme ease of use through soft key menu access, ideal for unskilled operators

5.5 digit resolution with 0.015% basic dc V accuracy,

Dual display to measure different signal characteristics such as Volts and Current simultaneously

Dedicated current ranges to measure dc leakage current (i-Leakage mode)

Math Functions: dBm, dB, Min, Max

Patented split terminal jacks for 2x4 Ohms function for precise 4-wire low ohms measurements.

RS-232 Interface

Programming Languages/Modes: Simplified ASCI, Fluke 45

Safety Rating EN61010-1 CAT I 1000 V, CAT II 600 V

Note

Accuracy= ± (% of reading+% of range)

Supplied with

Mains lead,TL71 Test Lead Set & users manual on CD-ROM.