Electromen OY DC Motor Controller, 12 → 35 V dc, 10 A, 12 V dc, 24 V dc

Se alla Motor Controllers

Antal (1 enhet)*

2 087,44 kr

(exkl. moms)

2 609,30 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 14 enhet(er) är redo att levereras
  • Plus 1 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +2 087,44 kr

*vägledande pris

RS-artikelnummer:
773-6835
Tillv. art.nr:
EM-176
Tillverkare / varumärke:
Electromen OY
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Electromen OY

Supply Voltage

12 → 35 V dc

Current Rating

10 A

Voltage Rating

12 V dc, 24 V dc

COO (Country of Origin):
FI

Electromen - EM-176 DC MOTOR CONTROLLER 12/24VDC, 10A


The EM-176 motor driver is a 4-quadrant DC-motor speed controller and is suitable for 12 or 24V supply. The unit utilizes a PWM driven H-bridge and achieves high efficiency and extensive controlling options.Control can be provide by a potentiometer or direct voltage signal and the drive offers adjustable load compensation, if required.An auxiliary card can be fitted to EM-176 to provide a means to apply a symmetrical (+/-) control input with either a voltage signal or potentiometer. The ramp feature is used to control the motor start up and braking rates, this is set with an on-board trim pot

The scale trimmer can be used to scale set value to correspond better the motor rpm.

The current limit can be set with either the trim pot or with a direct voltage signal, this can be adjusted to protect the motor and transmission in a jam situations

The unit has separate inputs for brake, freewheel and reverse.

The brake function shorts the motor poles to provide dynamic braking, the reverse command changes motor direction with ramp times to allow for smooth direct change

The freewheel command sets the motor free from all control, the freewheel command overrides all other commands

Features and Benefits


High efficiency drive with low RF emissions

4-quadrant control

Brake, freewheel and reverse commands

Option for symmetrical control input ±10V

Settable current limit

Settable acceleration/brake ramp

Braking options

Load compensation

Compact and DIN rail mountable;12-24Vdc, 10A continuous, 15A peak

Speed, direction and braking control

Adjustable start ramp and current limit

Compact and DIN rail mountable

EM-A1 card slot option for symmetrical control ±5V or ±10V (rev-stop-fwd)

EM-176 DC-Motor Controller


EM-176 is designed for DC-motor speed control. The unit can be used with unregulated DC supply. Motor loading can be compensated with inbuilt RxI-type adjustment.

Speed control value can be set with voltage signal or with potentiometer, there is an auxiliary voltage signal output for potentiometer use.

4 Quadrants

Braking

Freewheeling

Reversal

0 to 10V control

Optional ±10V control

Soft start ramp

Adjustable current limit

Load compensation (RxI)

High efficiency

High peak loading capacity

Rail mountable

relaterade länkar