Infineon Surface Hall Effect Sensor 2.4 V 5.5 V, SC-59, 3-Pin
- RS-artikelnummer:
- 753-3260
- Distrelec artikelnummer:
- 304-45-322
- Tillv. art.nr:
- TLE4913HTSA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 förpackning med 5 enheter)*
17,30 kr
(exkl. moms)
21,60 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 01 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 5 - 45 | 3,46 kr | 17,30 kr |
| 50 - 120 | 3,404 kr | 17,02 kr |
| 125 - 245 | 3,316 kr | 16,58 kr |
| 250 - 495 | 3,226 kr | 16,13 kr |
| 500 + | 3,204 kr | 16,02 kr |
*vägledande pris
- RS-artikelnummer:
- 753-3260
- Distrelec artikelnummer:
- 304-45-322
- Tillv. art.nr:
- TLE4913HTSA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | Chopper Technique, CMOS | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 2.4V | |
| Package Type | SC-59 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 3 | |
| Length | 3mm | |
| Height | 1.1mm | |
| Series | TLE4913 | |
| Width | 1.6 mm | |
| Standards/Approvals | Mil. Std. 883D Method 3015.7, EOS/ESD Association Standard S5.1-1993 | |
| Supply Current | 20μA | |
| Response Time | 93μs | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology Chopper Technique, CMOS | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 2.4V | ||
Package Type SC-59 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 3 | ||
Length 3mm | ||
Height 1.1mm | ||
Series TLE4913 | ||
Width 1.6 mm | ||
Standards/Approvals Mil. Std. 883D Method 3015.7, EOS/ESD Association Standard S5.1-1993 | ||
Supply Current 20μA | ||
Response Time 93μs | ||
Hall Effect Switches, Infineon
A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.
Hall Effect Sensors, Infineon
A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three Basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.
relaterade länkar
- Infineon Surface Hall Effect Sensor 2.4 V 5.5 V 3-Pin
- DiodesZetex Surface Hall Effect Sensor 2.5 V 5.5 V 3-Pin
- DiodesZetex 2-Axis Surface Hall Effect Sensor 2.5 V 5.5 V 3-Pin
- DiodesZetex Surface Micropower Omnipolar Hall-effect Switch 2.5 V 5.5 V 3-Pin
- Infineon Surface Hall Effect Sensor 2.7 V 24 V 3-Pin
- Infineon Surface Hall Effect Sensor 2.7 V 18 V 3-Pin
- DiodesZetex Surface Hall Effect Sensor 3 V 8 V 3-Pin
- Infineon Surface Hall Effect Latch 2.7 V 24 V 3-Pin