Infineon 2-Axis Surface Inclinometer 3 V 5.5 V, SPI, DSO, 8-Pin

RS-artikelnummer:: 223-8590
Tillv. art.nr:: TLE5012BE5000XUMA1
Tillverkare / varumärke:: Infineon

Infineon 2-Axis Surface Inclinometer 3 V 5.5 V, SPI, DSO, 8-Pin

Antal (1 rulle med 2500 enheter)*

63 897,50 kr

(exkl. moms)

79 872,50 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

Tillfälligt slut

Leverans från den 28 september 2026

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet	Per rulle*
2500 +	25,559 kr	63 897,50 kr

*vägledande pris

RS-artikelnummer:: 223-8590
Tillv. art.nr:: TLE5012BE5000XUMA1
Tillverkare / varumärke:: Infineon

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Infineon
	Sensor Type	Inclinometer Sensors
	Product Type	Inclinometer
	Number of Axis	2
	Technology	Digital
	Mount Type	Surface
	Interface Type	SPI
	Maximum Frequency Response	4.3kHz
	Minimum Frequency Response	3.8kHz
	Minimum Supply Voltage	3V
	Maximum Supply Voltage	5.5V
	Package Type	DSO
	Minimum Operating Temperature	-40°C
	Pin Count	8
	Maximum Operating Temperature	150°C
	Height	1.45mm
	Length	5mm
	Series	TLE5012B
	Width	4 mm
	Standards/Approvals	No
	Automotive Standard	AEC-Q100
	Supply Current	3.4mA

	Välj alla
	Brand Infineon
	Sensor Type Inclinometer Sensors
	Product Type Inclinometer
	Number of Axis 2
	Technology Digital
	Mount Type Surface
	Interface Type SPI
	Maximum Frequency Response 4.3kHz
	Minimum Frequency Response 3.8kHz
	Minimum Supply Voltage 3V
	Maximum Supply Voltage 5.5V
	Package Type DSO
	Minimum Operating Temperature -40°C
	Pin Count 8
	Maximum Operating Temperature 150°C
	Height 1.45mm
	Length 5mm
	Series TLE5012B
	Width 4 mm
	Standards/Approvals No
	Automotive Standard AEC-Q100
	Supply Current 3.4mA

Datasheet - TLE5012BE5000XUMA1

XENSIV™ - TLE5012B E5000 magnetic angle sensor with with PWM - push-pull configuration - interface

The Infineon TLE5012B is a 360° angle sensor that detects the orientation of a magnetic field. This is achieved by measuring sine and cosine angle components with monolithic integrated Giant Magneto Resistance (iGMR) elements. These raw signals (sine and cosine) are digitally processed internally to calculate the angle orientation of the magnetic field (magnet). The TLE5012B is a pre-calibrated sensor. The calibration parameters are stored in laser fuses. At start-up the values of the fuses are written into flip-flops, where these values can be changed by the application-specific parameters. Further precision of the angle measurement over a wide temperature range and a long lifetime can be improved by enabling an optional internal autocalibration algorithm. Data communications are accomplished with a bi-directional Synchronous Serial Communication (SSC) that is SPI-compatible. The sensor configuration is stored in registers, which are accessible by the SSC interface. Additionally four other interfaces are available with the TLE5012B: Pulse-Width-Modulation (PWM) Protocol, Short-PWM-Code (SPC) Protocol, Hall Switch Mode (HSM) and Incremental Interface (IIF). These interfaces can be used in parallel with SSC or alone. Pre-configured sensor derivates with different interface settings are available. Online diagnostic functions are provided to ensure reliable operation.

Summary of Features

•Giant Magneto Resistance (GMR)-based principle

•Integrated magnetic field sensing for angle measurement

•360° angle measurement with revolution counter and angle speed measurement

•Two separate highly accurate single bit SD-ADC

•15 bit representation of absolute angle value on the output (resolution of 0.01°)

•16 bit representation of sine / cosine values on the interface

•Max. 1.0° angle error over lifetime and temperature-range with activated auto-calibration

•Bi-directional SSC Interface up to 8 Mbit/s

•Supports Safety Integrity Level (SIL) with diagnostic functions and status information

•Interfaces: SSC, PWM, Incremental Interface (IIF), Hall Switch Mode (HSM), Short PWM Code (SPC, based on SENT protocol defined in SAE J2716)

•Output pins can be configured (programmed or pre-configured) as push-pull or open-drain

•Bus mode operation of multiple sensors on one line is possible with SSC or SPC interface

•0.25 μm CMOS technology

•Automotive qualified: -40°C to 150°C (junction temperature)

•ESD > 4 kV (HBM)

•TLE5012B E5000: with PWM (push-pull configuration) interface

•TLE5012B E5020: with PWM (open-drain configuration) interface

•RoHS compliant (Pb-free package)

•Halogen-free

PRO-SIL™ Features

•Test vectors switchable to ADC input (activated via SSC interface)

•Inversion or combination of filter input streams (activated via SSC interface)

•Data transmission check via 8-bit Cyclic Redundancy Check (CRC) for SSC communication and 4-bit CRC nibble for SPC interface

•Built-in Self-test (BIST) routines for ISM, CORDIC, CCU, ADCs run at startup

•Two independent active interfaces possible

•Overvoltage and undervoltage detection

Potential Applications

•Electrical commutated motor (e.g. used in Electric Power Steering (EPS))

•Rotary switches

•Steering angle measurements

•General angular sensing