Silicon Labs 1-Axis Surface Hall Effect Sensor 2.25 V 5.5 V, PWM, Analogue, SENT, SOT-23, 3-Pin
- RS-artikelnummer:
- 144-6546
- Tillv. art.nr:
- Si7211-B-00-IVR
- Tillverkare / varumärke:
- Silicon Labs
Antal (1 förpackning med 5 enheter)*
48,21 kr
(exkl. moms)
60,26 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 5 enhet(er) från den 19 januari 2026
- Dessutom levereras 25 enhet(er) från den 19 januari 2026
- Dessutom levereras 1 920 enhet(er) från den 26 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 5 + | 9,642 kr | 48,21 kr |
*vägledande pris
- RS-artikelnummer:
- 144-6546
- Tillv. art.nr:
- Si7211-B-00-IVR
- Tillverkare / varumärke:
- Silicon Labs
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Silicon Labs | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect | |
| Number of Axis | 1 | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Interface Type | PWM, Analogue, SENT | |
| Magnetic Type | Analogue | |
| Maximum Frequency Response | 7kHz | |
| Minimum Frequency Response | 10Hz | |
| Minimum Supply Voltage | 2.25V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 3 | |
| Height | 1.15mm | |
| Series | Si721X | |
| Standards/Approvals | AEC-Q100 | |
| Width | 1.6 mm | |
| Length | 2.9mm | |
| Response Time | 8.8μs | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 9mA | |
| Välj alla | ||
|---|---|---|
Brand Silicon Labs | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect | ||
Number of Axis 1 | ||
Technology CMOS | ||
Mount Type Surface | ||
Interface Type PWM, Analogue, SENT | ||
Magnetic Type Analogue | ||
Maximum Frequency Response 7kHz | ||
Minimum Frequency Response 10Hz | ||
Minimum Supply Voltage 2.25V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 3 | ||
Height 1.15mm | ||
Series Si721X | ||
Standards/Approvals AEC-Q100 | ||
Width 1.6 mm | ||
Length 2.9mm | ||
Response Time 8.8μs | ||
Automotive Standard AEC-Q100 | ||
Supply Current 9mA | ||
Si721x Series Hall Effect Field Output Sensors
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge Nibble Transmission) outputs. Typical applications include mechanical position sensing in consumer, industrial and automotive applications, Camera image stabilization, zoom, and autofocus functions, sensing of control knobs and selector switches.
• Industry-leading sensitivity allows use with larger Air gaps and smaller magnets
• Precise compensation for temperature and offset drift.
• Low power consumption to improve operating life in battery powered applications
• Low voltage (1.7-5.5V) and High voltage (3.3-26.5V) versions
• Compact 3 or 5-pin SOT23 package
• AEC-Q100 Qualified for automotive applications
Hall Effect Sensors, Silicon Labs
relaterade länkar
- Silicon Labs 1-Axis Surface Hall Effect Sensor 2.25 V 5.5 V Analogue SOT-23, 3-Pin
- Silicon Labs 1-Axis Surface Hall Effect Sensor 2.25 V 5.5 V SENT SOT-23, 5-Pin
- Silicon Labs 1-Axis Surface Hall Effect Sensor 1.7 V 5.5 V PWM SOT-23, 3-Pin
- Silicon Labs 1-Axis Surface Hall Effect Sensor 1.7 V 5.5 V 3-Pin
- Silicon Labs 1-Axis Surface Switch/Latch Hall Effect Magnetic Position Sensor 1.7 V 5.5 V 3-Pin
- Silicon Labs 1-Axis Surface Hall Effect Sensor 1.71 V 5.5 V DFN-8
- ams OSRAM 1-Axis Surface Hall Effect Sensor 3.3 V 5 V PWM 16-Pin
- Silicon Labs Surface Hall Effect Sensor 1.7 V 5.5 V SOT-23, 5-Pin