Silicon Labs 1-Axis Surface Hall Effect Sensor 2.25 V 5.5 V, PWM, Analogue, SENT, SOT-23, 3-Pin
- RS-artikelnummer:
- 144-1570
- Tillv. art.nr:
- Si7211-B-00-IVR
- Tillverkare / varumärke:
- Silicon Labs
Antal (1 rulle med 3000 enheter)*
23 838,00 kr
(exkl. moms)
29 796,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 05 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 3000 + | 7,946 kr | 23 838,00 kr |
*vägledande pris
- RS-artikelnummer:
- 144-1570
- Tillv. art.nr:
- Si7211-B-00-IVR
- Tillverkare / varumärke:
- Silicon Labs
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Silicon Labs | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect | |
| Number of Axis | 1 | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Magnetic Type | Analogue | |
| Interface Type | PWM, Analogue, SENT | |
| Maximum Frequency Response | 7kHz | |
| Minimum Frequency Response | 10Hz | |
| Minimum Supply Voltage | 2.25V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 3 | |
| Width | 1.6 mm | |
| Length | 2.9mm | |
| Standards/Approvals | AEC-Q100 | |
| Height | 1.15mm | |
| Series | Si721X | |
| Response Time | 8.8μs | |
| Supply Current | 9mA | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Silicon Labs | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect | ||
Number of Axis 1 | ||
Technology CMOS | ||
Mount Type Surface | ||
Magnetic Type Analogue | ||
Interface Type PWM, Analogue, SENT | ||
Maximum Frequency Response 7kHz | ||
Minimum Frequency Response 10Hz | ||
Minimum Supply Voltage 2.25V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 3 | ||
Width 1.6 mm | ||
Length 2.9mm | ||
Standards/Approvals AEC-Q100 | ||
Height 1.15mm | ||
Series Si721X | ||
Response Time 8.8μs | ||
Supply Current 9mA | ||
Automotive Standard AEC-Q100 | ||
Si721x Series Hall Effect Field Output Sensors
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge Nibble Transmission) outputs. Typical applications include mechanical position sensing in consumer, industrial and automotive applications, Camera image stabilization, zoom, and autofocus functions, sensing of control knobs and selector switches.
• Industry-leading sensitivity allows use with larger Air gaps and smaller magnets
• Precise compensation for temperature and offset drift.
• Low power consumption to improve operating life in battery powered applications
• Low voltage (1.7-5.5V) and High voltage (3.3-26.5V) versions
• Compact 3 or 5-pin SOT23 package
• AEC-Q100 Qualified for automotive applications
Hall Effect Sensors, Silicon Labs
relaterade länkar
- Silicon Labs Surface Mount Hall Effect Sensor 3-Pin
- Silicon Labs Surface Mount Hall Effect Sensor 5-Pin
- Silicon Labs Surface Mount Hall Effect Sensor Switch 5-Pin
- Silicon Labs Surface Mount Hall Effect Sensor Switch 3-Pin
- Silicon Labs Surface Mount Hall Effect Sensor, DFN8
- Silicon Labs 1-Axis Surface Hall Effect Sensor I2C
- RS PRO Silver Aluminium Profile Strut 8mm Groove, 1000mm Length
- RS PRO 12V NiMH Rechargeable Battery Pack, 2Ah - Pack of 1