Silicon Labs 1-Axis Surface Hall Effect Sensor 1.7 V 5.5 V, SENT, PWM, Analogue, SOT-23, 3-Pin
- RS-artikelnummer:
- 144-1573
- Tillv. art.nr:
- Si7213-B-00-IVR
- Tillverkare / varumärke:
- Silicon Labs
Antal (1 rulle med 3000 enheter)*
21 462,00 kr
(exkl. moms)
26 826,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 19 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 3000 + | 7,154 kr | 21 462,00 kr |
*vägledande pris
- RS-artikelnummer:
- 144-1573
- Tillv. art.nr:
- Si7213-B-00-IVR
- Tillverkare / varumärke:
- Silicon Labs
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Silicon Labs | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Number of Axis | 1 | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Interface Type | SENT, PWM, Analogue | |
| Magnetic Type | Open Drain SENT | |
| Maximum Frequency Response | 7kHz | |
| Minimum Frequency Response | 10Hz | |
| Minimum Supply Voltage | 1.7V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 3% | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 125°C | |
| Height | 1.15mm | |
| Series | Si721X | |
| Width | 1.6 mm | |
| Length | 2.9mm | |
| Standards/Approvals | Ford EMC-CS-2009.1, ISO 7637-2-2-11 | |
| Response Time | 8.8μs | |
| Supply Current | 5.5mA | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Silicon Labs | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Number of Axis 1 | ||
Technology CMOS | ||
Mount Type Surface | ||
Interface Type SENT, PWM, Analogue | ||
Magnetic Type Open Drain SENT | ||
Maximum Frequency Response 7kHz | ||
Minimum Frequency Response 10Hz | ||
Minimum Supply Voltage 1.7V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 3% | ||
Pin Count 3 | ||
Maximum Operating Temperature 125°C | ||
Height 1.15mm | ||
Series Si721X | ||
Width 1.6 mm | ||
Length 2.9mm | ||
Standards/Approvals Ford EMC-CS-2009.1, ISO 7637-2-2-11 | ||
Response Time 8.8μs | ||
Supply Current 5.5mA | ||
Automotive Standard AEC-Q100 | ||
Si721x Series Hall Effect Field Output Sensors
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge Nibble Transmission) outputs. Typical applications include mechanical position sensing in consumer, industrial and automotive applications, Camera image stabilization, zoom, and autofocus functions, sensing of control knobs and selector switches.
• Industry-leading sensitivity allows use with larger Air gaps and smaller magnets
• Precise compensation for temperature and offset drift.
• Low power consumption to improve operating life in battery powered applications
• Low voltage (1.7-5.5V) and High voltage (3.3-26.5V) versions
• Compact 3 or 5-pin SOT23 package
• AEC-Q100 Qualified for automotive applications
Hall Effect Sensors, Silicon Labs
relaterade länkar
- Silicon Labs 1-Axis Surface Hall Effect Sensor 1.7 V 5.5 V PWM SOT-23, 3-Pin
- Silicon Labs 1-Axis Surface Hall Effect Sensor 2.25 V 5.5 V SENT SOT-23, 5-Pin
- Silicon Labs 1-Axis Surface Hall Effect Sensor 2.25 V 5.5 V Analogue SOT-23, 3-Pin
- Silicon Labs 1-Axis Surface Hall Effect Sensor 1.7 V 5.5 V 3-Pin
- Silicon Labs 1-Axis Surface Switch/Latch Hall Effect Magnetic Position Sensor 1.7 V 5.5 V 3-Pin
- Silicon Labs Surface Hall Effect Sensor 1.7 V 5.5 V SOT-23, 5-Pin
- Silicon Labs Surface Mount Hall Effect Sensor 1.7 V 5.5 V 5-Pin
- Silicon Labs Surface Mount Hall Effect Sensor 5-Pin