NXP, 16bit ARM7TDMI-S, LPC21 Microcontroller, 60MHz, 256 kB Flash, 64-Pin LQFP

Mängdrabatt möjlig

Antal (1 enhet)*

255,07 kr

(exkl. moms)

318,84 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 286 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 - 7255,07 kr
8 - 39242,06 kr
40 - 79229,56 kr
80 +216,55 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
725-7755
Tillv. art.nr:
LPC2129FBD64/01,15
Tillverkare / varumärke:
NXP
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

NXP

Family Name

LPC21

Package Type

LQFP

Mounting Type

Surface Mount

Pin Count

64

Device Core

ARM7TDMI-S

Data Bus Width

16 bit, 32bit

Program Memory Size

256 kB

Maximum Frequency

60MHz

RAM Size

16 kB

USB Channels

0

Number of PWM Units

1

Number of SPI Channels

2

Number of I2C Channels

1

Typical Operating Supply Voltage

1.65 → 1.95 V, 3 → 3.6 V

Number of USART Channels

0

Number of CAN Channels

2

Number of UART Channels

1

Number of Ethernet Channels

0

Number of PCI Channels

0

Height

1.45mm

Dimensions

10.1 x 10.1 x 1.45mm

Pulse Width Modulation

1 (6 Channel) (Motor Control)

Program Memory Type

Flash

Length

10.1mm

ADCs

4 x 10 bit

Instruction Set Architecture

RISC

Width

10.1mm

Maximum Operating Temperature

+85 °C

Number of ADC Units

1

Minimum Operating Temperature

-40 °C

Number of LIN Channels

0

COO (Country of Origin):
TW

ARM7 Family Microcontrollers, NXP


A range of NXP microcontrollers based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, that combine the microcontroller with 32 kB, 64 kB, 128 kB, 256 kB and 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate.

High integration and low power consumption
wide range of serial communications interfaces and on-chip SRAM options
Alternative 16-bit Thumb-mode reduces code by more than 30 % with minimal performance penalty
32 bit timers, PWM channels and up to 47 GPIO lines
Ideally suited to industrial control and medical systems

Note

NXP is a trademark of NXP B.V.

relaterade länkar