Microchip, 8bit 8051, Microcontrollers Microcontroller, 20MHz, 8 kB Flash, 44-Pin TQFP

Mängdrabatt möjlig

Antal (1 förpackning med 5 enheter)*

103,49 kr

(exkl. moms)

129,36 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 260 enhet(er) från den 10 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per förpackning*
5 - 2020,698 kr103,49 kr
25 - 9520,048 kr100,24 kr
100 +19,376 kr96,88 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
199-5363
Tillv. art.nr:
AT89S51-24AU
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Family Name

Microcontrollers

Package Type

TQFP

Mounting Type

Surface Mount

Pin Count

44

Device Core

8051

Data Bus Width

8bit

Program Memory Size

8 kB

Maximum Frequency

20MHz

RAM Size

128 B

USB Channels

0

Number of PWM Units

0

Number of SPI Channels

0

Number of I2C Channels

0

Typical Operating Supply Voltage

4 → 5.5 V

Number of CAN Channels

0

Number of UART Channels

1

Pulse Width Modulation

0

Dimensions

10 x 10 x 1mm

Width

10mm

Height

1mm

Number of Ethernet Channels

0

Program Memory Type

Flash

Minimum Operating Temperature

-40 °C

Instruction Set Architecture

MCS-51

Maximum Number of Ethernet Channels

0

Number of ADC Units

0

Maximum Operating Temperature

+85 °C

ADCs

0

Length

10mm

The Microchip AT89S51 8-bit microcontroller has 4Kbytes of In-System Programmable Flash memory. It operates at 4V to 5.5V power supply. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional non-volatile memory programmer. By combining a versatile 8-bit CPU with In-System Programmable Flash on a monolithic chip, the Atmel AT89S51 is a powerful microcontroller which provides a highly-flexible and cost-effective solution to many embedded control applications. It features 4K bytes of Flash, 128 bytes of RAM, 32 I/O lines, Watchdog timer, two data pointers, two 16-bit timer/counters, a five-vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator, and clock circuitry. It is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port, and interrupt system to continue functioning. The Power down mode saves the RAM contents but freezes the oscillator, disabling all other chip functions until the next external interrupt or hardware reset.

4K Bytes of In-System Programmable (ISP) Flash Memory

Three-level Program Memory Lock

Fully static operation

Three-level Program Memory Lock

128 x 8-bit Internal RAM

32 Programmable I/O Lines

Two 16-bit Timer/Counters

Six Interrupt Sources

Full Duplex UART Serial Channel

Low-power Idle and Power-down Modes

Interrupt Recovery from Power-down Mode

Watchdog Timer

Dual Data Pointer

Power-off Flag

Fast Programming Time

Flexible ISP Programming (Byte and Page Mode)

relaterade länkar