Microchip, 8 bit 8051, AT89S51 Microcontroller, 20 MHz, 8kB FLASH, 44-Pin 44A

Antal (1 fack med 160 enheter)*

2 752,48 kr

(exkl. moms)

3 440,64 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 160 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per Bricka*
160 +17,203 kr2 752,48 kr

*vägledande pris

RS-artikelnummer:
199-5362
Tillv. art.nr:
AT89S51-24AU
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

Product Type

Microcontroller

Series

AT89S51

Package Type

44A

Mount Type

Surface

Pin Count

44

Device Core

8051

Data Bus Width

8bit

Program Memory Size

8kB

Interface Type

UART, SPI

Maximum Clock Frequency

20MHz

RAM Size

128bit

Maximum Supply Voltage

5.5V

Number of Programmable I/Os

32

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Width

10 mm

Length

10mm

Standards/Approvals

RoHS

Height

1mm

Minimum Supply Voltage

4V

Automotive Standard

No

ADCs

0 bit

Program Memory Type

FLASH

Instruction Set Architecture

MCS-51

Number of Timers

2

The Microchip AT89S51 8-bit microcontroller has 4Kbytes of In-System Programmable Flash memory. It operates at 4V to 5.5V power supply. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional non-volatile memory programmer. By combining a versatile 8-bit CPU with In-System Programmable Flash on a monolithic chip, the Atmel AT89S51 is a powerful microcontroller which provides a highly-flexible and cost-effective solution to many embedded control applications. It features 4K bytes of Flash, 128 bytes of RAM, 32 I/O lines, Watchdog timer, two data pointers, two 16-bit timer/counters, a five-vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator, and clock circuitry. It is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port, and interrupt system to continue functioning. The Power down mode saves the RAM contents but freezes the oscillator, disabling all other chip functions until the next external interrupt or hardware reset.

4K Bytes of In-System Programmable (ISP) Flash Memory

Three-level Program Memory Lock

Fully static operation

Three-level Program Memory Lock

128 x 8-bit Internal RAM

32 Programmable I/O Lines

Two 16-bit Timer/Counters

Six Interrupt Sources

Full Duplex UART Serial Channel

Low-power Idle and Power-down Modes

Interrupt Recovery from Power-down Mode

Watchdog Timer

Dual Data Pointer

Power-off Flag

Fast Programming Time

Flexible ISP Programming (Byte and Page Mode)

relaterade länkar