Microchip, MA330043
- RS-artikelnummer:
- 193-6261
- Distrelec artikelnummer:
- 302-96-302
- Tillv. art.nr:
- MA330043
- Tillverkare / varumärke:
- Microchip
Antal (1 enhet)*
531,78 kr
(exkl. moms)
664,72 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Håller på att utgå
- Slutlig(a) 10 enhet(er), redo att levereras
Enheter | Per enhet |
|---|---|
| 1 + | 531,78 kr |
*vägledande pris
- RS-artikelnummer:
- 193-6261
- Distrelec artikelnummer:
- 302-96-302
- Tillv. art.nr:
- MA330043
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Classification | Demonstration Board | |
| Kit Name | dsPIC33EP128GS806 DP PM | |
| Processor Type | Digital Signal Controller | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Classification Demonstration Board | ||
Kit Name dsPIC33EP128GS806 DP PM | ||
Processor Type Digital Signal Controller | ||
The dsPIC33EP128GS806 Digital Power Plug-In Module (DP PIM) is a demonstration board that showcases the Microchip dsPIC33EP128GS806 16-Bit Digital Signal Controller (DSC) features. The DP PIM provides access to the dsPIC33EP128GS806 analog inputs, the Digital-to-Analog Converter (DAC) outputs, the Pulse-Width Modulation (PWM) outputs and the General Purpose Input and Output (GPIO) ports.
Microchip dsPIC33EP128GS806 16-Bit Digital Signal Controller (64-pin TQFP package)
ICSP™ programming header (6-pin, 2.54 mm header)
On-board LDO (3.6 VDC to 6.3 VDC) with Power Good (PG) function
Solder pad for ground connection
Micro USB connector
MCP2221A USB to UART/I2C serial converter
Power indicator LED (Green)
User LED (Red)
Board edge connection interface for analog inputs/outputs, PWM outputs and GPIO ports
Analog input with op amp buffer via test point loop connector, can be used for Bode plot measurements
Test point loops for DAC outputs
ICSP™ programming header (6-pin, 2.54 mm header)
On-board LDO (3.6 VDC to 6.3 VDC) with Power Good (PG) function
Solder pad for ground connection
Micro USB connector
MCP2221A USB to UART/I2C serial converter
Power indicator LED (Green)
User LED (Red)
Board edge connection interface for analog inputs/outputs, PWM outputs and GPIO ports
Analog input with op amp buffer via test point loop connector, can be used for Bode plot measurements
Test point loops for DAC outputs