Mains Test Block Cable Entry 4 → 7mm, Rated At 13A, 240 V ac

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Cliff Electronics Main Test Block

The Cliff Electronics mains test block has a 13A fuse with 2m cable for the Euro plug. This connector is the quicktest QT1 made from a tough impact-resistant, flame-retardant plastic. When the lid is open, the wires of the plugless lead can be inserted into the insulated clips. The insulated clips are colour coded for easy identification. Once the lid is closed, current passes to the equipment being tested. A neon light illuminates when the connector is live and ready to use.
Warning:
Customers are advised to refer to the Electricity at Work Regulations 1989, with particular attention to regulation 10 (connections) before using these products. These test connectors are not suitable for making mains connections to equipment in domestic use as defined in the Low Voltage Electrical Equipment (Safety) Regulations, 1989.

Features and Benefits

The supply voltage rating is 24VDC
Connection keys are electrically isolated by opening the lid
Colour coded cable clips for easy identification
Power neon indicator

Applications

Laboratories
Test beds
Service areas

Specifikationer
Attribute Value
Voltage Rating 240 V ac
Cable Entry 4 → 7mm
Width 60mm
Height 48mm
Depth 127mm
Maximum Supported Cable 7mm
Current Rating 13A
Minimum Supported Cable 4mm
372 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
399,33 kr
(exkl. moms)
499,16 kr
(inkl. moms)
Enheter
Per unit
1 - 4
399,33 kr
5 +
375,73 kr
Related Products
Black or orange versions incorporating a 3-way terminal ...
Description:
Black or orange versions incorporating a 3-way terminal block. Wiring instructions supplied. Contact material: Nickel plated brassHousing material: Glass filled polyamide Operating temp: -25 to +70°CTorque rating: Gland nut and locking 1.13Nm (min).
Tested and approved to IEC 61984:2001 and IP ...
Description:
Tested and approved to IEC 61984:2001 and IP 68 Rated to 2 barCollar mechanism allows fast connection or release of the connectorThe Connector and Internal Screw Terminals can be easily assembled without the need for special toolingPositive keyways to prevent ...
Buccaneer sealed in-line cable joiner available in 4, ...
Description:
Buccaneer sealed in-line cable joiner available in 4, 6 and 8 way variants, designed for joining multicore cables together in-line. The maximum standard cable acceptance is 6-8mm in diameter and the connector is rated at IP68 and IP69K when fully ...
From RS PRO, this BS1363 UK standard plug ...
Description:
From RS PRO, this BS1363 UK standard plug is reliable, hardwearing and suitable for use with corresponding wall sockets in a range of environments.The power plug is rewireable and features a two-part body with a standard single screw assembly for ...