Martindale TEK 300, Multi Function Calibrator - RS Calibration

RS-artikelnummer:: 207-9250
Tillv. art.nr:: RSTEK300
Tillverkare / varumärke:: Martindale

Martindale TEK 300, Multi Function Calibrator - RS Calibration

För närvarande inte tillgänglig

Tyvärr, vi vet inte när detta kommer att finnas i lager igen.

Alternativ

Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.

Martindale TEK 300 Loop Calibrator Battery

RS-artikelnummer: 203-293

Varje

6 034,79 kr

(exkl. moms)

7 543,49 kr

(inkl. moms)

RS-artikelnummer:: 207-9250
Tillv. art.nr:: RSTEK300
Tillverkare / varumärke:: Martindale

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Martindale
	Model Number p	TEK 300
	Calibrated	RSCAL
	Battery Type	AA
	Power Source	Battery
	Weight	380g
	Height	44mm
	Length	180mm
	Maximum Operating Temperature	50°C
	Minimum Operating Temperature	0°C
	Width	100mm

	Välj alla
	Brand Martindale
	Model Number p TEK 300
	Calibrated RSCAL
	Battery Type AA
	Power Source Battery
	Weight 380g
	Height 44mm
	Length 180mm
	Maximum Operating Temperature 50°C
	Minimum Operating Temperature 0°C
	Width 100mm

RoHS-status: Undantagen

Martindale Direct Current Calibrator

The Martindale direct current calibrator is able to sink or source a current up to 20mA. It is intended for process control instrumentation and general purpose signal

injection applications. It has a monitor mode facility incorporated into the design, whereby the current (0mA to 20mA) in the process loop can be monitored and read directly from the digital display. This device is also fully protected against inadvertent misuse. This low-cost unit offers exceptional value for money means of delivering and measuring current ranging between 0mA and 20mA currents. This makes it ideal for cost-effective application in testing, calibrating and troubleshooting in a wide range of process control environments.

Features and Benefits

Sink, source and monitor modes ranging between 0mA and 20mA F. S. (+0.1%)

DC/DC converter output of 28.5V (+0.1V)

Resolution of 10μA

Overload protection for additional safety

ABS case with clear three digit LCD display

Temperature drift 150ppm°C

Linearity of 0.15%

Output noise (typically) of 4mV p/p

Battery condition and error indication LEDs

Requires two PP3 alkaline batteries

Capable of withstanding DC voltages up to 50V but can be damaged by AC input

Operating temperature ranges between 0°C and 50°C

Applications

Process control automation

Manufacturing

Instrumentation

Certifications

ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007