Martindale TEK 300 Loop Calibrator Battery

Se alla Loop Calibrators
För närvarande inte tillgänglig
Vi vet inte om den här artikeln kommer tillbaka i lager, RS har för avsikt att ta bort den från vårt utbud snart.

Kalibrerade alternativ:

presentation
Martindale TEK 300 Loop Calibrator Battery
Typ av kalibrering:
RSCAL
RS-artikelnummer
207-9250

Varje

6 034,79 kr

(exkl. moms)

7 543,49 kr

(inkl. moms)

presentation
Martindale TEK 300 Loop Calibrator Battery
Typ av kalibrering:
UKAS
RS-artikelnummer
207-9266

Varje

6 339,79 kr

(exkl. moms)

7 924,74 kr

(inkl. moms)

RS-artikelnummer:
203-293
Tillv. art.nr:
TEK300
Tillverkare / varumärke:
Martindale
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Martindale

Product Type

Loop Calibrator

Model Number

TEK 300

Resolution

10 μA

Battery Type

AA

Power Source

Battery

Minimum Operating Temperature

0°C

Maximum Operating Temperature

50°C

Weight

380g

Height

44mm

Width

100 mm

Length

180mm

Standards/Approvals

No

Hazardous Area Certification

No

RoHS-status: Undantagen

Martindale Direct Current Calibrator


The Martindale direct current calibrator is able to sink or source a current up to 20mA. It is intended for process control instrumentation and general purpose signal

injection applications. It has a monitor mode facility incorporated into the design, whereby the current (0mA to 20mA) in the process loop can be monitored and read directly from the digital display. This device is also fully protected against inadvertent misuse. This low-cost unit offers exceptional value for money means of delivering and measuring current ranging between 0mA and 20mA currents. This makes it ideal for cost-effective application in testing, calibrating and troubleshooting in a wide range of process control environments.

Features and Benefits


Sink, source and monitor modes ranging between 0mA and 20mA F. S. (+0.1%)

DC/DC converter output of 28.5V (+0.1V)

Resolution of 10μA

Overload protection for additional safety

ABS case with clear three digit LCD display

Temperature drift 150ppm°C

Linearity of 0.15%

Output noise (typically) of 4mV p/p

Battery condition and error indication LEDs

Requires two PP3 alkaline batteries

Capable of withstanding DC voltages up to 50V but can be damaged by AC input

Operating temperature ranges between 0°C and 50°C

Applications


Process control automation

Manufacturing

Instrumentation

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

Relaterade länkar