Sensata / Cynergy3 OLS7 Optisk sensor, Chassimontering Nivåvakt Polytetrafluoretylen

Se alla Nivågivare

Antal (1 enhet)*

572,99 kr

(exkl. moms)

716,24 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Begränsat lager
  • 17 kvar, redo att levereras
  • Plus 3 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +572,99 kr

*vägledande pris

RS-artikelnummer:
780-0311
Tillv. art.nr:
OLS700D3SH
Tillverkare / varumärke:
Sensata / Cynergy3
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Sensata / Cynergy3

Enhetstyp

Optisk sensor

Produkttyp

Nivåvakt

Typ av fäste

Chassimontering

Husmaterial

Polysulfon

Kabellängd

250mm

Minsta arbetsstemperatur

-25°C

Maximal arbetstemperatur

80°C

Maximal DC-spänning

15.4V dc

Maximal ström

100mA

Maximalt tryck

7bar

Packningsmaterial

Polytetrafluoretylen

Standarder/godkännanden

No

Certifiering för farligt område

Nej

Serie

OLS7

Gängstorlek

1/4 in NPT

COO (ursprungsland):
CN

Sensata Cynergy3 Optical Sensor Level Switch, Transistor Output, 7 Bar - OLS7 Series - OLS700D3SH


Use this optical sensor from Sensata Cynergy3 to detect the presence or absence of all types of liquids. It consists of an infrared emitter coupled with a light transistor and a sensing tip for efficient detection. When the tip makes contact with a liquid, the infrared light escapes due to refraction, reducing the coupling and triggering a detection signal. This sensor is made of polysulfone thermoplastic, which can withstand exposure to hot liquids. You'll find this type of sensor used to control liquid levels to prevent overspill, as well as to detect leaks.

Features & Benefits


• Maximum operating pressure of 7 bar for use in heavy-duty applications

• Polytetrafluoroethylene (PTFE) wire sheath for protection from corrosion and electromagnetic interference (EMI)

• Cable length of 250mm for ease of connection in tight spaces

• Resistant to false triggering caused by foaming for more accurate detection

How do I install this sensor?


This sensor can be installed on either the side or bottom of a tank. Drill a 12mm hole on a flat surface, ensuring it's free of burrs to prevent leakage. You can then either insert the device into the hole or screw it into an M12x1 socket.

Relaterade länkar