Sauter LB 300-2. Avståndsmätare, 300 mm 3 %, LCD display

Se alla Lasermätare
För närvarande inte tillgänglig
Vi vet inte om den här artikeln kommer tillbaka i lager, RS har för avsikt att ta bort den från vårt utbud snart.
RS-artikelnummer:
136-3537
Tillv. art.nr:
LB 300-2
Tillverkare / varumärke:
Sauter
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Sauter

Måttenhet

Brittiska mätenheter, Metrisk

Noggrannhet

3 %

Mätområde

300 mm

Produkttyp

Avståndsmätare

Arbetsmiljö

0 °C till 40 °C

Skärmtyp

LCD

Vikt

480g

Modellnummer

LB 300-2.

Standarder/godkännanden

ISO calibration certificate 961-150

Höjd

30mm

Bredd

42 mm

Längd

440mm

Certifiering för farligt område

Nej

COO (ursprungsland):
CN

Kern Digital Length Measuring Device LB


Kern Digital length measuring device measures distance directly in machines or sites with RS-232 interface.

Features and Benefits


• Digital sliding calliper with a superior precision even at high operation speed;• Easy mounting to machine tools, conveyer, test stands etc.;• Zeroing,pre-added and pre-reduced length as well as switching the unit can be done manually;• Data interface RS-232, standard

Parallels, Surface Finish & Hardness


Surface Finish

Any machined component has a surface geometry which consists of three basic elements:

Form or Curvature - Whether the surface has irregular bumps or dimensional changes

Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)

Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)

Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.

Relaterade länkar