RS PRO Skåpvärmare, 80W, 110V ac 93 °C 191mm 67 mm
- RS-artikelnummer:
- 500-140
- Tillverkare / varumärke:
- RS PRO
Mängdrabatt möjlig
Visa alternativ för volympriserAntal (1 enhet)*
655,27 kr
(exkl. moms)
819,09 kr
(inkl. moms)
GRATIS leverans för online beställningar över 750,00 kr
I lager
- Dessutom levereras 18 enhet(er) från den 08 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 655,27 kr |
| 5 - 9 | 653,27 kr |
| 10 - 24 | 631,66 kr |
| 25 - 49 | 606,10 kr |
| 50 + | 575,33 kr |
*vägledande pris
- RS-artikelnummer:
- 500-140
- Tillverkare / varumärke:
- RS PRO
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Varumärke | RS PRO | |
| Produkttyp | Skåpvärmare | |
| Uteffekt | 80W | |
| Matningsspänning | 110V ac | |
| Yttemperatur | 93°C | |
| Anslutningstyp | Kabel | |
| Djup | 67mm | |
| Typ av fäste | Yta | |
| Bredd | 191mm | |
| Isolerad PTC | Nej | |
| Monteringsposition | Horisontell | |
| Standarder/godkännanden | RoHS | |
| Välj alla | ||
|---|---|---|
Varumärke RS PRO | ||
Produkttyp Skåpvärmare | ||
Uteffekt 80W | ||
Matningsspänning 110V ac | ||
Yttemperatur 93°C | ||
Anslutningstyp Kabel | ||
Djup 67mm | ||
Typ av fäste Yta | ||
Bredd 191mm | ||
Isolerad PTC Nej | ||
Monteringsposition Horisontell | ||
Standarder/godkännanden RoHS | ||
- COO (ursprungsland):
- GB
RS PRO Anti-Condensation Heaters
A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.
A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.;Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.
A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.
Features and Benefits
Note: The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom
Why RS PRO?
Looking to reduce costs but keep the same quality?
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
Note
The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.
Relaterade länkar
- RS PRO Skåpvärmare, 80W, 230V ac 80W 93 °C 191mm 67 mm
- RS PRO Skåpvärmare, 100W, 110V ac 100W 85 °C 191mm 67 mm
- RS PRO Skåpvärmare, 60W, 110V ac 93 °C 121mm 67 mm
- RS PRO Skåpvärmare, 100W, 230V ac 100W 85 °C 191mm 67 mm
- RS PRO Skåpvärmare, 60W, 230V ac 60W 93 °C 121mm 67 mm
- RS PRO Skåpvärmare, 40W, 110V ac 88 °C 121mm 67 mm
- RS PRO Skåpvärmare, 20W, 110V ac 45 °C 65mm 67 mm
- RS PRO Skåpvärmare, 20W, 230V ac 20W 45 °C 65mm 67 mm