Microchip 8-Channel I/O Expander SPI 18-Pin SOIC, MCP23S08T-E/SO
- RS-artikelnummer:
- 177-3338P
- Tillv. art.nr:
- MCP23S08T-E/SO
- Tillverkare / varumärke:
- Microchip
Antal 10 enheter (levereras på en kontinuerlig remsa)*
130,10 kr
(exkl. moms)
162,60 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 1 580 enhet(er) från den 15 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 10 + | 13,01 kr |
*vägledande pris
- RS-artikelnummer:
- 177-3338P
- Tillv. art.nr:
- MCP23S08T-E/SO
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Number of I/O Channels | 8 | |
| Interface | SPI | |
| Number of Pins | 18 | |
| Package Type | SOIC | |
| Clock Frequency | 10MHz | |
| Mounting Type | Surface Mount | |
| Maximum Supply Voltage | 5.5 V | |
| Minimum Supply Voltage | 1.8 V | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Number of I/O Channels 8 | ||
Interface SPI | ||
Number of Pins 18 | ||
Package Type SOIC | ||
Clock Frequency 10MHz | ||
Mounting Type Surface Mount | ||
Maximum Supply Voltage 5.5 V | ||
Minimum Supply Voltage 1.8 V | ||
- COO (Country of Origin):
- US
The MCP23X08 device provides 8-bit, general purpose, parallel I/O expansion for I2C bus or SPI applications. The two devices differ in the number of hardware address pins and the serial interface:MCP23008 – I2C interface, three address pins
MCP23S08 – SPI interface, two address pinsThe MCP23X08 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits. The data for each input or output is kept in the corresponding Input or Output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.
MCP23S08 – SPI interface, two address pinsThe MCP23X08 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits. The data for each input or output is kept in the corresponding Input or Output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.
8-bit port expander with interrupt output
2 address inputs for up to 4 devices on one bus
25mA sink/source capability per I/O
Supports up to 10MHz SPI™ clock speeds
Internal power-on-reset (POR)
2 address inputs for up to 4 devices on one bus
25mA sink/source capability per I/O
Supports up to 10MHz SPI™ clock speeds
Internal power-on-reset (POR)
