Schmersal TC 236 Safety Hinge Switch, NO/NC

Se alla Hinge Switches
Mängdrabatt möjlig

Antal (1 enhet)*

881,54 kr

(exkl. moms)

1 101,92 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 6 enhet(er) är redo att levereras
  • Plus 1 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 - 9881,54 kr
10 - 14845,71 kr
15 +808,98 kr

*vägledande pris

RS-artikelnummer:
193-5777
Tillv. art.nr:
T4C 236-11Z
Tillverkare / varumärke:
Schmersal
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Schmersal

Series

TC 236

Lock Style

Hinge

Normal State Configuration

NO/NC

Maximum AC Voltage

230V

Maximum DC Voltage

24V

Shaft Length

70mm

RoHS-status: Undantagen

COO (Country of Origin):
DE

Schmersal Safety Hinge Switch, NO/NC, 24V DC - TC 236 Series - T4C 236-11Z


Ensure the safety of personnel in your workspace by installing this safety hinge switch from Schmersal on a gate or guard. It cuts power to an electrical circuit when the actuator is moved by just a 4.5° rotation. This makes it highly sensitive to the movement of your safety guard, helping to minimise accidents and damage to machinery. The actuator head can be repositioned by 90° for flexible installation.

Features & Benefits


• Self-extinguishing glass fibre-reinforced enclosure for safety in the event of a fire

• Stainless steel actuator is resistant to corrosion and impact

• IP67 (ingress protection) rating means it's dust-tight and can withstand submersion in 1m of water for up to 30 minutes

• Broad operating temperature range of -30°C to +80°C for use in demanding environments

Applications


• Automated machinery

• Processing and packaging systems

• Doors, gates and guards

How long will this safety hinge switch last?


This safety hinge switch has a robust mechanical lifespan of 1,000,000 operations, so it will last a long time without needing to be replaced.

T.C 236, Hinge Slider


These switches are designed for hinged guards and have a built-in actuator lever which operates the contact block with a positive mechanical linkage

N/C safety contact positively disconnected after just 4.5° rotation

Head can be turned in any one of four 90° positions

Slow action contact system

The housing with snap-on cover fastened without screws to facilitate easy connection

Hinge Switch


Note

It is important to select the correct lever model dependent upon the position of the hinge on the guard

Standards

IEC947-5-1/EN60947-5-1/DIN VDE 0660 Part 200; BG-GS-ET-15; DIN EN 50047; BS5304

Relaterade länkar