RS PRO Reflector Bracket, 160mm
- RS-artikelnummer:
- 246-2517
- Tillverkare / varumärke:
- RS PRO
Mängdrabatt möjlig
Antal (1 enhet)*
638,40 kr
(exkl. moms)
798,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 42 enhet(er) är redo att levereras
- Plus 31 enhet(er) är redo att levereras från en annan plats
- Dessutom levereras 12 enhet(er) från den 12 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 638,40 kr |
| 5 - 9 | 612,19 kr |
| 10 + | 598,75 kr |
*vägledande pris
- RS-artikelnummer:
- 246-2517
- Tillverkare / varumärke:
- RS PRO
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | RS PRO | |
| Length | 160mm | |
| Width | 92mm | |
| Thickness | 32mm | |
| Heating Element Form | Reflector Bracket | |
| Välj alla | ||
|---|---|---|
Brand RS PRO | ||
Length 160mm | ||
Width 92mm | ||
Thickness 32mm | ||
Heating Element Form Reflector Bracket | ||
RoHS-status: Undantagen
RS PRO Reflector Bracket, 160 mm
This reflector bracket from RS PRO is designed for use with ceramic heating elements. It reflects the heat from the element in the desired direction in order to improve efficiency and effectiveness, as well as protecting the wall or ceiling that the heater is mounted on.
The reflector has a ceramic terminal block mounted on the back of it, allowing normal mains wiring to be connected to one side and the heat-proof wiring for the actual heater to the other side. This ensures that the mains wiring is protected from the element.
This product is suitable for use in dry, indoor environments, such as offices, warehouses or workshops. The twin threaded sockets on the back allow for easy mounting to beams or rails using standard M6 bolts. It's advised that temperature sensing control elements are used with it to ensure safety.
The reflector has a ceramic terminal block mounted on the back of it, allowing normal mains wiring to be connected to one side and the heat-proof wiring for the actual heater to the other side. This ensures that the mains wiring is protected from the element.
This product is suitable for use in dry, indoor environments, such as offices, warehouses or workshops. The twin threaded sockets on the back allow for easy mounting to beams or rails using standard M6 bolts. It's advised that temperature sensing control elements are used with it to ensure safety.
Features and Benefits
• Reflector bracket heating element
• Dimensions of 160 mm (L) x 92 mm (W) x 32 mm (D)
• Dimensions of 160 mm (L) x 92 mm (W) x 32 mm (D)