TE Connectivity Axiell 100 kΩ Motstånd 5 % 0.5 W Kolfilm, CFR50 serien

För närvarande inte tillgänglig
Vi vet inte om den här artikeln kommer tillbaka i lager, RS har för avsikt att ta bort den från vårt utbud snart.
Förpackningsalternativ:
RS-artikelnummer:
132-977
Tillv. art.nr:
CFR50J100K
Tillverkare / varumärke:
TE Connectivity
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

TE Connectivity

Resistans

100kΩ

Produkttyp

Motstånd

Effektklassning

0.5W

Resistortyp

Allmän användning

Förpackning

Ammo-förpackning

Tolerans ±

5%

Axial/radial

Axiell

Spänning

350V

Teknologi

Kolfilm

Serie

CFR50

Fordonsstandard

Nej

Förpackning/kartong

3000

Minsta arbetsstemperatur

-55°C

Antal ben

2

Maximal arbetstemperatur

155°C

Längd

9mm

Bredd

3mm

Standarder/godkännanden

No

Diameter

3mm

Temperaturkoefficient

-1200 → 0 ppm/°C

Ledningsdiameter

540μm

TE Connectivity CFR50 Series, 0.5W Carbon Film Resistors


The CFR Series from TE Connectivity are a range of premium quality carbon film resistors whose ceramic core has a high alumina content offering superb power to size ratios, not typically associated with carbon film products. CFR Series are available in a range of power ratings from 1 ohm to 10 Mohm with the smallest case size (CFR50) having a full 0.5 W power rating.

This low cost, highly reliability carbon film resistor, is suitable for use in most types of circuits, including audio and communications as well as measurement and computer applications.

• Premium quality carbon film

• Highly reliable

• Excellent power to size ratio

• High alumina content

• 0.5W Rated power @ 70°C

• Available in power ratings from 1 ohm to 10 Mohm

• Suitable for a range of small and large-scale applications

A comprehensive range of high stability carbon film resistors qualified and tested to the requirements of IEC 115 and IEC 115-2. The ruggedised welded cap and lead method of manufacture provides a considerable strength and resistance to damage. The coating materials and the colour bands are epoxy resin and are highly resistant to solvents, abrasion and chipping. Improvements in materials and processing have allowed the rated power to be improved. Excellent stability against changes in load conditions or moisture levels, with a low noise level and high reliability make these carbon film resistors suitable for a wide range of applications. Rated at 70°C in free Air mounted horizontally. Climatic category 55/155/56.

Relaterade länkar

Håll dig uppdaterad om våra senaste produkter och tjänster

E-postadress

De personuppgifter som du lämnar när du anmäler dig till nyhetsbrevet kommer att behandlas i enlighet med vår integritetspolicy.