Sensata Cynergy3 LFS Series Paddle Flow Switch, 15.2 l/min, 19 l/min Min, 60.6 L/min, 83.3 L/min Max

Se alla Flow Sensors

Antal (1 enhet)*

4 445,51 kr

(exkl. moms)

5 556,89 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 7 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +4 445,51 kr

*vägledande pris

RS-artikelnummer:
780-0119
Tillv. art.nr:
LFS-01
Tillverkare / varumärke:
Sensata / Cynergy3
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Sensata / Cynergy3

Device Type

Paddle

Minimum Flow Rate

15.2 l/min, 19 l/min

Maximum Flow Rate

60.6 L/min, 83.3 L/min

Supply Voltage

230 V

Pipe Diameter Range

1 → 3 in

Connection Type

1 NPT

Maximum Pressure

20bar

Material

Aluminium Alloy

Minimum Operating Temperature

-30°C

Series

LFS

Maximum Operating Temperature

+75°C

Current Rating

1 A

COO (Country of Origin):
CN

Sensata Cynergy3 Vertical Paddle Flow Switch, 1A, 20 Bar - LFS Series - LFS-01


Use this paddle flow switch from Sensata Cynergy3 to accurately control the flow of substances in a pipe. The vertically mounted flow sensor's electrical connections convey a trip motion to a pump to adjust flow rates that are too high or too low. The switch's paddle is constructed from high-grade stainless steel, which is highly corrosion-resistant and able to withstand the abrasive effects of harsh chemicals. It's suitable for flow detection in pipes with a bore size of 1in to 3in, such as those found in emergency sprinkler systems.

Features & Benefits


• Aluminium alloy housing to prevent rust and extend the unit's service life
• IP65 (ingress protection) rating means the float's electrical connections are protected from dirt and moisture
• High maximum operating pressure of 20 bar for use in heavy-duty applications
• Supplied with a cable gland for making quick and secure electrical connections

Where do you install a flow switch in a pipe?


You should place this switch where there's a straight run in a pipe on either side of the switch. As it's a vertical sensor, it needs to be installed in a pipe with an upward flow direction.

relaterade länkar