Sensata Cynergy3 FSP10 Series In-line Flow Switch for Liquid, 3 L/min Min, 80 L/min Max

Se alla Flow Sensors

Antal (1 enhet)*

1 724,40 kr

(exkl. moms)

2 155,50 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • 4 enhet(er) levereras från den 26 december 2025
  • Dessutom levereras 6 enhet(er) från den 06 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +1 724,40 kr

*vägledande pris

RS-artikelnummer:
780-0273
Tillv. art.nr:
FSP10A30
Tillverkare / varumärke:
Sensata / Cynergy3
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Sensata / Cynergy3

Media Monitored

Liquid

Device Type

In-line

Minimum Flow Rate

3 L/min

Maximum Flow Rate

80 L/min

Supply Voltage

250 V ac

Pipe Diameter Range

G1

Connection Type

1 BSP

Maximum Pressure

8bar

Material

Brass/Polyamide

Maximum Media Temperature

+85°C

Series

FSP10

Maximum Operating Temperature

+85°C

Current Rating

10 A

COO (Country of Origin):
CN

Sensata Cynergy3 In-Line Flow Switch, 10A, 250V AC - FSP10 Series - FSP10A30


This in-line flow switch from Sensata Cynergy3 directly controls an electric pump. It's used in gravity-fed systems to increase the pressure or flow of water. Its brass tube is strong and corrosion-resistant for a durable, long-lasting connection to a pipe. As it automatically starts a pump when the flow rate exceeds 3L/min (litres per minute), there's no need for manual intervention, making it simple to use. When water demand recedes or a tank empties, it turns the pump off. You'll find switches like this one used in irrigation and plumbing systems.

Features & Benefits


• Polyamide (PA) housing that's resistant to wear for an extended service life
• IP54 (ingress protection) rating for protection against dust and water splashes from any direction
• Supplied with electrical terminations for convenient installation

Where should I mount this flow switch?


You should install this in-line flow switch in a pipe directly above the pump. As its operation relies upon water flowing against gravity, you should mount it vertically with the flow direction upward.

How do I know if the switch is working properly?


You can check the function of the switch by using the test button that's located underneath the device.

relaterade länkar