RS PRO, 0.05 → 10 L/min Flow Transducer, Cable, Pulse, 4.5 → 24 V dc

  • RS-artikelnummer 508-2704
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Mini Turbine Flow Meter

The mini turbine flowmeter is designed to give high performance and competitive pricing. Its totally non-metallic wetted components make this the ideal choice for the metering of aggressive chemicals including ultra-pure water. The standard inlet tubes are barbed to accept 8mm hose sizes. The bearings are made of sapphire for long life and reliability, the body is moulded PVDF as standard and the 'O' ring seal is typically Viton®.

At the heart of the meter is a precision turbine that rotates freely on robust sapphire bearings and contains over-moulded magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of NPN/PNP pulses that are readily interfaced with a most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout.

Features and Benefits:

• Low-cost Sapphire bearings
• Body and cap made from durable PVDF
• Over-moulded Magnets
• Viton 'O' ring seal
• Hall effect sensor
• 0.1% repeatability
• -25°C min to 125°C max
• Supplied with two metres of oil resistant, screened cable

Typical applications:

• Drink dispensing Laboratory tests
• Cooling equipment
• Active flow alarms
• Semiconductor plant

Flow Rates:

The liquid flow rate can be controlled by applying different-size jets (attached):

Note

When used in automotive applications, the formation of vapour should be minimised by fitting the transducer between the fuel pump and the carburettor, but before any pressure regulator. The device should be mounted vertically if vapour is likely to form.

//media.rs-online.com/t_line/L256225-01.gif
//media.rs-online.com/t_line/LD256225-01.gif
Specifikationer
Attribute Value
Maximum Flow Rate 0.05 → 10 L/min
Supply Voltage 4.5 → 24 V dc
Pipe Diameter Range 8 mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +125°C
Current Rating 8 mA
380 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 087,19 kr
(exkl. moms)
1 358,99 kr
(inkl. moms)
Enheter
Per unit
1 +
1 087,19 kr
Related Products
Two wall mounting control units and adaptor mount ...
Description:
Two wall mounting control units and adaptor mount transmitter module designed to provide precise control of liquid flow quantities. Induces a measured frequency into a transducer which is proportional to the flow rate. Selectable dosage mode, overfill correction, allocation of ...
Compact, intelligent sensors featuring MEMS technology for precision ...
Description:
Compact, intelligent sensors featuring MEMS technology for precision mass airflow and LNG measurement. Precision unidirectional mass airflowStable output across full scaleLow power consumptionJoint type: Bamboo with external dia. 7.4mm (min.); 8.6mm (max.) passage diameter 4mm. Except 619-1859 which is an ...
Designed for high temperature, continuous flow measurement of ...
Description:
Designed for high temperature, continuous flow measurement of neutral, slightly aggressive, solid-free liquids, in hazardous environments. For liquid flow measurementFrequency output with pulse signal proportional to the flow rateInterfaces via S030HT pipework flow adaptor with pressure-tight quarter turn ...
For liquid flow measurementSuitable for high temperature applications ...
Description:
For liquid flow measurementSuitable for high temperature applications and especially for CIP (Clean-In-Place) systems, industrial washing machines, heating and cooling systems, etc.FDA approved high tech materials with excellent chemical resistancesNo moving parts in measuring techniqueUse with insertion-style ...