RS PRO, 0.05 → 10 L/min Flow Transducer, Cable, Pulse, 4.5 → 24 V dc

  • RS-artikelnummer 508-2704
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Mini Turbine Flow Meter

The mini turbine flowmeter is designed to give high performance and competitive pricing. Its totally non-metallic wetted components make this the ideal choice for the metering of aggressive chemicals including ultra-pure water. The standard inlet tubes are barbed to accept 8mm hose sizes. The bearings are made of sapphire for long life and reliability, the body is moulded PVDF as standard and the 'O' ring seal is typically Viton®.

At the heart of the meter is a precision turbine that rotates freely on robust sapphire bearings and contains over-moulded magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of NPN/PNP pulses that are readily interfaced with a most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout.

Features and Benefits:

• Low-cost Sapphire bearings
• Body and cap made from durable PVDF
• Over-moulded Magnets
• Viton 'O' ring seal
• Hall effect sensor
• 0.1% repeatability
• -25°C min to 125°C max
• Supplied with two metres of oil resistant, screened cable

Typical applications:

• Drink dispensing Laboratory tests
• Cooling equipment
• Active flow alarms
• Semiconductor plant

Flow Rates:

The liquid flow rate can be controlled by applying different-size jets (attached):

Note

When used in automotive applications, the formation of vapour should be minimised by fitting the transducer between the fuel pump and the carburettor, but before any pressure regulator. The device should be mounted vertically if vapour is likely to form.

//media.rs-online.com/t_line/L256225-01.gif
//media.rs-online.com/t_line/LD256225-01.gif
Specifikationer
Attribute Value
Maximum Flow Rate 0.05 → 10 L/min
Electrical Connection Cable
Control Output Pulse
Supply Voltage 4.5 → 24 V dc
Pipe Diameter Range 8 mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +125°C
Current Rating 8 mA
For Use With Oil & Water
271 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 087,19 kr
(exkl. moms)
1 358,99 kr
(inkl. moms)
Enheter
Per unit
1 +
1 087,19 kr
Relaterte Produkter
Fluid passes through internal flow straighteners, to stabilize ...
Description:
Fluid passes through internal flow straighteners, to stabilize turbulence, before impacting on the vaned turbine rotor which rotates at a speed proportional to the flow rate. The rotor vanes have stainless steel tips which are detected by a sensor mounted ...
Lock speed setting, with the touch of a ...
Description:
Lock speed setting, with the touch of a buttonIt can be locked only by pushing the handle after adjustment. Convenient opening indication scaleThe opening indication scale for the needle valve is provided on the handle to facilitate speed adjustments. Easy ...
The principle of operation is when a liquid ...
Description:
The principle of operation is when a liquid flows through the pipe, the paddle wheel in the fitting (S030 Flow Adaptor -available separately) is set in rotation inducing a measuring frequency in the transducer, which is proportional to the flow. ...
Suitable for flow measurement & ON/OFF control applications ...
Description:
Suitable for flow measurement & ON/OFF control applications with process fluids, pump protection, cooling/heating circuits and lubricationInterfaces via S030 pipework flow adaptor (see stock no. 249-7513 typically)Large LCD display of flow rate with bargraphSimulation function, LED status indicationMulti-language ...