Burkert, 2 → 1200 L/min Flow Controller, Cable Plug, Swivel 5-Pin M12 Plug, Relay, 12 → 30 V dc

  • RS-artikelnummer 370-4979
  • Tillv. art.nr 436475
  • Tillverkare / varumärke Burkert
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

SE32 Flow Switch

Suitable for flow measurement & ON/OFF control applications with process fluids, pump protection, cooling/heating circuits and lubrication
Interfaces via S030 pipework flow adaptor (see stock no. 249-7513 typically)
Large LCD display of flow rate with bargraph
Simulation function, LED status indication
Multi-language , menu-driven setup
No contact between fluids and switch
Reverse polarity and short circuit protected
M12 5-pin connection or M12 & DIN plug

Specifikationer
Attribute Value
Maximum Flow Rate 2 → 1200 L/min
Electrical Connection Cable Plug, Swivel 5-Pin M12 Plug
Control Output Relay
Mounting Style Compact
Supply Voltage 12 → 30 V dc
Display Screen 8 Digit LCD
Pipe Diameter Range DN 15 → 100 mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
3 610,31 kr
(exkl. moms)
4 512,89 kr
(inkl. moms)
Enheter
Per unit
1 +
3 610,31 kr
Relaterte Produkter
Fluid passes through internal flow straighteners, to stabilize ...
Description:
Fluid passes through internal flow straighteners, to stabilize turbulence, before impacting on the vaned turbine rotor which rotates at a speed proportional to the flow rate. The rotor vanes have stainless steel tips which are detected by a sensor mounted ...
The digital control electronics serves to operate proportional ...
Description:
The digital control electronics serves to operate proportional solenoid control valves. Plug-on control electronics with switchable signal inputConverts analogue control signal to modulated output for varying the opening of the proportional solenoid control valveCompensated for coil temperature/operating ...
Series IR Precision Regulators are designed to be ...
Description:
Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401).
Two wall mounting control units and adaptor mount ...
Description:
Two wall mounting control units and adaptor mount transmitter module designed to provide precise control of liquid flow quantities. Induces a measured frequency into a transducer which is proportional to the flow rate. Selectable dosage mode, overfill correction, allocation of ...