Cynergy3 Flödesregulator FS Horisontell, Vertikal, Relä, Hastighet 3.75L/min, Kabel 240V 22 mm

Antal (1 enhet)*

349,66 kr

(exkl. moms)

437,08 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Begränsat lager
  • 76 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +349,66 kr

*vägledande pris

RS-artikelnummer:
257-082
Tillv. art.nr:
FS22A
Tillverkare / varumärke:
Cynergy3
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Cynergy3

Maximal flödeshastighet

3.75L/min

Produkttyp

Flödesregulator

Terminaltyp

Kabel

Styrutgång

Relä

Typ av fäste

Horisontell, Vertikal

Displayskärm

Nej

Maximal rördiameter

22mm

Minsta arbetsstemperatur

-20°C

Maximal matningsspänning

240V

Maximal arbetstemperatur

85°C

Certifiering för farligt område

Nej

Standarder/godkännanden

WRAS

Strömsklass

600mA

Serie

FS

COO (ursprungsland):
CN

Sensata Cynergy3 Liquid Flow Switch, 22mm Diameter, 3.5L/m - FS Series - FS22A


To measure the liquid flowing through your system, turn to this Sensata Cynergy3 switch. If the flow rate exceeds 3.75l/m (litres per minute), the 'normally open' (NO) contacts will close, sending a signal to the relay control output and enabling you to stop the flow. Install this switch in your wider system to regulate flow automatically, improving safety and efficiency. You can also release flow when the rate drops below 1.4l/m, making it possible to control the liquid in your system without restricting it entirely.

Features and Benefits


• Operating temperature range of -20°C to +85°C for use in extreme conditions

• Switching voltage of 240V AC or 120V DC offers flexible power supply options

What's the maximum operating pressure of this switch?


Sensata's F22 series switches have a maximum operating pressure of 10 bar. This makes them suitable for heavy-duty applications.

What kind of systems can I use this switch in?


This switch is designed for liquids only and should not be used with significant amounts of solid particles. It's suitable for weak acids (up to a concentration of 5%) but not for any type of chlorinated liquid such as bleach.

Normally Open Flow Switch


Flow switch series from Cynergy3. These flow switches are reed switch based and can monitor the flow of liquids up to 10bar in pressure. This series of flow switches can be mounted horizontally or vertically and have minimal flow restriction. Flow switches are ideally used in water but can be used in weak acidic liquids.

Mainly for use with hot or cold water, however they may also be used with a wide range of chemicals

Pressure rating 150psi maximum

Switching current 1A dc or ac (rms)

Switching voltage 240V dc or ac (rms)

Switching power 15W (15VA) resistive loads

Operating temperature 85°C maximum

Vertical or horizontal mounting

Standard compression or push fit fittings

WRAS approved for use in cold water

Complete with a 250mm lead

Note

Not to be used in any chlorinated liquids

Relaterade länkar

Håll dig uppdaterad om våra senaste produkter och tjänster

E-postadress

De personuppgifter som du lämnar när du anmäler dig till nyhetsbrevet kommer att behandlas i enlighet med vår integritetspolicy.