Infineon, CFI, SPI NOR 128 MB Flash-minne, 14.5 ns, 8 Ben, WSON, 2
- RS-artikelnummer:
- 181-8282
- Tillv. art.nr:
- S25FL128SAGNFV000
- Tillverkare / varumärke:
- Infineon
Antal (1 fack med 338 enheter)*
10 192,39 kr
(exkl. moms)
12 740,572 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 02 juli 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per fack* |
|---|---|---|
| 338 + | 30,155 kr | 10 192,39 kr |
*vägledande pris
- RS-artikelnummer:
- 181-8282
- Tillv. art.nr:
- S25FL128SAGNFV000
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Varumärke | Infineon | |
| Minnesstorlek | 128MB | |
| Produkttyp | Flash-minne | |
| Gränssnittstyp | CFI,, SPI | |
| Kapseltyp | WSON | |
| Antal ben | 8 | |
| Maximal klockfrekvens | 133MHz | |
| Typ av fäste | Yta | |
| Celltyp | NOR | |
| Minsta matningsspänning | 1.65V | |
| Maximal matningsspänning | 3.6V | |
| Minsta arbetsstemperatur | -40°C | |
| Maximal arbetstemperatur | 105°C | |
| Längd | 6mm | |
| Standarder/godkännanden | No | |
| Höjd | 0.75mm | |
| Antal bitar per ord | 8 | |
| Antal ord | 16M | |
| Fordonsstandard | AEC-Q100 | |
| Serie | S25FL128S | |
| Antal banker | 2 | |
| Maximal slumpmässig åtkomsttid | 14.5ns | |
| Välj alla | ||
|---|---|---|
Varumärke Infineon | ||
Minnesstorlek 128MB | ||
Produkttyp Flash-minne | ||
Gränssnittstyp CFI,, SPI | ||
Kapseltyp WSON | ||
Antal ben 8 | ||
Maximal klockfrekvens 133MHz | ||
Typ av fäste Yta | ||
Celltyp NOR | ||
Minsta matningsspänning 1.65V | ||
Maximal matningsspänning 3.6V | ||
Minsta arbetsstemperatur -40°C | ||
Maximal arbetstemperatur 105°C | ||
Längd 6mm | ||
Standarder/godkännanden No | ||
Höjd 0.75mm | ||
Antal bitar per ord 8 | ||
Antal ord 16M | ||
Fordonsstandard AEC-Q100 | ||
Serie S25FL128S | ||
Antal banker 2 | ||
Maximal slumpmässig åtkomsttid 14.5ns | ||
This family of devices connect to a host system via a SPI. Traditional SPI single bit serial input and output (Single I/O or SIO) is
supported as well as optional two bit (Dual I/O or DIO) and four bit (Quad I/O or QIO) serial commands. This multiple width interface
is called SPI Multi-I/O or MIO. In addition, the FL-S family adds support for DDR read commands for SIO, DIO, and QIO that transfer
address and read data on both edges of the clock.
The Eclipse architecture features a Page Programming Buffer that allows up to 128 words (256 bytes) or 256 words (512 bytes) to be
programmed in one operation, resulting in faster effective programming and erase than prior generation SPI program or erase
algorithms.
Executing code directly from flash memory is often called Execute-In-Place or XIP. By using FL-S devices at the higher clock rates
supported, with QIO or DDR-QIO commands, the instruction read transfer rate can match or exceed traditional parallel interface,
asynchronous, NOR flash memories while reducing signal count dramatically.
The S25FL128S and S25FL256S products offer high densities coupled with the flexibility and fast performance required by a variety
of embedded applications. They are ideal for code shadowing, XIP, and data storage.