EA Elektro-Automatik Elektronisk last EA-ELR 1000, 0 to 12 A, 0/750 V, 0 to 3000 W, Regenerativ för elektroniska laster

Se alla Elektroniska laster

Antal (1 enhet)*

79 739,00 kr

(exkl. moms)

99 673,75 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 1 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +79 739,00 kr

*vägledande pris

RS-artikelnummer:
259-2945
Tillv. art.nr:
EA-ELR 10750-12 2U
Tillverkare / varumärke:
EA Elektro-Automatik
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

EA Elektro-Automatik

Serie

EA-ELR 1000

Produkttyp

Elektronisk last

Lasttyp

Regenerativ för elektroniska laster

Konstantspänningslägesområde

0/750 V

Konstantströmslägesområde

0 to 12 A

Konstantresistanslägesområde

2 to 3000 Ω

Gränssnittstyp

Ethernet, EtherCAT, RS232, CAN, USB

Konstanteffektlägesområde

0 to 3000 W

Effektivitet

0.95%

Rack enhet

2U

Driftlägen

Konstant spänning, Konstant effekt, Konstant ström, Konstant resistans

Standarder/godkännanden

EN 610101 IEC 610101 UL 610101 CSA C22.2 No 610101 BS EN 610101

COO (ursprungsland):
DE
The EA Elektro-Automatik high-end most versatile programmable electronic load based upon a high-performance FPGA controller unit with up to 16-bit resolution. It operates as DC electronic load and it features the superior flexible auto-ranging input (e-load)for a usage at either high voltage or high current as required within the nominal power rating. It is regenerative means the DC energy extracted from an EUT is converted into commercial AC supply with a 95% efficiency and returned back into the grid (no excess dissipative heats compared to conventional dissipative loads). The series include an intuitive 5 colour TFT touch panel with up to 5-digit resolution, allowing to see the set- and read back values in one view and giving access to the integrated functions such as function generator, fuel cell and battery-simulation(R-mode). For external control, this series comes standard with USB, Ethernet and analogue interface.

Operates as DC load

Auto-ranging DC-input

Constant U, I, P and R mode

Regenerative in DC load mode, with up to 95% efficiency

FPGA controlled, with up to 16 bit resolution

For demanding laboratory application, R&D

Function generator, battery, fuel cell-simulation

Sensitive 5 TFT touch display of up to 5 digits

USB/Ethernet/Analog 0-5V/0-10V on board, plug in play slot for retrofitting more interface options

Hard wire connection, DC output safety terminals

A plug’n play slot is provided as well, to retrofit further available optional interface such as CAN, Ether CAT, Profibus, Profinet. This series is a perfect instrument for device- and component testing in modern R&D environment, suitable for 19 integration and bench usage.

Relaterade länkar