STMicroelectronics Effektswitch IC Hög sida Hög sida

Mängdrabatt möjlig

Antal (1 enhet)*

71,68 kr

(exkl. moms)

89,60 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 500 enhet(er) från den 23 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 - 971,68 kr
10 - 2466,98 kr
25 - 9963,39 kr
100 - 24958,24 kr
250 +54,21 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
260-2760
Tillv. art.nr:
IPS2050HQ
Tillverkare / varumärke:
STMicroelectronics
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

STMicroelectronics

Strömbrytartopologi

Hög sida

Strömbrytartyp

Hög sida

Produkttyp

Effektswitch IC

Motstånd vid påslagning RdsOn

50mΩ

Antal utgångar

16

Maximal matningsspänning

60V

Minsta arbetsstemperatur

-40°C

Maximal arbetstemperatur

105°C

Standarder/godkännanden

RoHS

Fordonsstandard

Nej

COO (ursprungsland):
PH
The IPS2050H/HQ and IPS2050H-32/HQ-32 are dual high-side switch ICs able to drive capacitive, resistive or inductive loads with one side connected to ground.

The very low RDS-ON (≤ 50 mΩ up to TJ = 125 °C) makes the IC suitable for applications with up to 2.4 A (IPS2050H/HQ) or 5.6 A (IPS2050H-32/HQ-32) steady state operating current.

Each output channel is independently protected against junction over-temperature events by a junction temperature sensor, and a further temperature sensor is included to monitor case temperature, so an overheated output channel can only be turned back ON when the case temperature returns below the reset temperature.

The embedded per-channel overload protection circuit monitors the output current and, on triggering of the activation threshold (IPK-X), starts modulating the impedance of the output switch to limit the output current to ILIM-X, for both IC and load protection.

The IC offers two different sets of activation threshold and limitation levels (IPKH-X, ILIMH-X and IPKL-X, ILIML-X) for smart driving of capacitive loads (such as bulb lamps) and loads with initial peak current requirements.

The IC diagnostics is based on two FAULT pins (current source), one for each channel. Each FAULT pin is activated by an overload or an over-temperature event on the related channel.

•8 V to 60 V operating supply voltage range

•Operating output current: 2.4 A (IPS2050H/HQ) or 5.6 A (IPS2050H-32/HQ-32) per channel

•Smart driving of capacitive load

•Fast demagnetization of inductive loads

•Under-voltage lock-out

•VCC over-voltage protection

•Per-channel overload and over-temperature protection

•Case over-temperature protection

•Ground disconnection protection

•Per channel overload/over-temperature event diagnostic pins

•Designed to meet IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5

•Packages: PowerSSO-24 and QFN48L 8x6x0.9 mm

Relaterade länkar

Recently viewed